AK-31B

AK-31B

Product description: Specification:: AK-31B semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 5-10L. It is widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. 1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally. 2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. 3. The machine is also equipped with a muffler and oiling system to lubricate the mechanical part of the machine. 4. The machine can be operated in the step-by-step mode and the semi-auto mode. 5. The machine is small with low investment, easy and safe to operate

Used HOWO 6X4 Dump Trucks

Used HOWO 6X4 Dump Trucks

Year: 2019 2020 2021 Engine: 336hp,375hp,400hp,430hp Bucket: 20-25cbm Chassis Model = SINOTRUK HOWO Engine = WP12.400E201 Drive Model = 6x4 Fuel Type/Emission = Diesel , Euro II, Euro III Transmission = HW19710, 10 forward & 2 rear

AK-150A Automatic Shrink Packaging Machine

AK-150A Automatic Shrink Packaging Machine

Specifications Shrink Wrapping Machine 1-Capacity:10Pcs/Minute 2-Pack type:PE,without tray 3-Flim width:<600mm 4.L600 x W320 x H400mm Product parameter: Facility external size:L5050×W3300×H2100mm Wrappage max size:L600×W320×H400mm Shrinkage film size:PE Shrinkage thermo thickness:0.03-0.15mm Thermo shrinkage tunnel temperature: 160 - 260°can adjust at will. Max output per minute:8-10 bag Facility power:18Kw Actual power:15Kw/hr Fressure requirement:380/220V Facility weight:1.2T Fan machine:1.1Kw 2set 380V, 65W 4set 380V Facility basic configuration: Thinget:5.7 inch touch screen, PLC controlling system Taiwan AIRTAC pneumatic component 1set Taiwan Telta frequency converter 3 set Stainless steel wing heating tube 12 piece China-America cooperation Teflon convey belt. Shanghai Hemei electric-motor and Zhejiang Taili worm speed-regulation machine. South-Korea Autonics photoelectric switch, proximity. Thermo sealing knife ulminium-mould heating board, even temperature, long life, our company special production. Whole machine plastic-sprayed, machine rack adopt to high-quality carbon steel, main part adopt to stainless steel. Tottle convey machine length:2600mm Carton and wrappage film pack separately. Product description: Frequency converter speed adjust,two segment convey device. Bottle pushing, thermo sealing and cutting whole movement adopt to pneumatic fracture. Proximity switch control film length. Touch screen, PLC system greatly increase facility movement reliability. Double-wind recycle fan machine, ensure shrinkage tunnel inside even temperature. Super big wind-volume cooling system, ensure quickly get into shape . Anti-high temperature teflon convey belt, convey steadily, high-strength anti-abrasion. Frequency limitless speed adjust convey belt frame. Convey belt height can make according client requirement, adjust range:±50mm Bottle convey machine can meet with client bottle forward direction requirement, can lengthen or shorten. Wing stainless steel heating system, endurance. Meet with product instant stop requirement product-bearing rack device ensure production line consistency.

Digital Security System

Digital Security System

With our Digital Security Platform, we provide wireless CCTV cameras, hidden cameras, and alarm system that allow user to view their assets and get alerts on tablets, mobile phone and computer from anywhere and at anytime

Learn More
Wireless Intercom Phone

Wireless Intercom Phone

This is a State of the Art Wireless Intercom Phone that allow you to make free call within 1km an open range and 400m indoor. It comes with no monthly charge or recurring cost.

Learn More
QGF150 Filling Machine

QGF150 Filling Machine

Specifications 1.Product: Mineral water, Drinking Water 2.Bottle: Plastic 3.Capacity: 150BPH 4.Fully Automatic, for 3 to 5Gallon 5,CE, UL, SGS, ISO, FDA Pure Water Filling Machine QGF series barreled production line consists of washing, filling and capping. It is suitable for the filling of all kinds of round and square barrels. The production line adopts electric program control. It has safe devices, such as interlock and their quality is reliable. The whole machine is made of stainless steel. It meets the demands of food hygiene. Its structure is reasonable, and its operation is convenient. It is an ideal equipment for producing mineral, super –pure, space, and distilled water.

AK-S150 Automatic Sleeve Lableing Machine

AK-S150 Automatic Sleeve Lableing Machine

Whole machine agreat quantity of stainless steel and good-quality ulminium alloy ,reasonable fracture、compact,convenient to adjust; Shrinkage film volume label rack, match with adjustable device, convenient to adjust according to differ volume label 5″~10″paper tube. Simply installation, then can convenient for square and round bottle. No need of instrument, rotary mechanism is convenient to adjust, apply to differ bottle type. Unique sleeve labelling method, adopt to pressing sleeve labelling method, not only convenient but also reasonable. Auto controlling feeding system, level-off shrinkage film materials and regulate/adjust strain simultaneity. Unique design knife plate, within specification scope, can avoid changing knife base, knife changing is quick and conveniently. Middle guide-pole clip system, mould changing is more quick, no need any instrument. Label location system, can promote and demote in-phase adjust location according to specific bottle type requirement. Adopt to Japanese import servo system and high-sensitivity photoelectric, label cutting precision is highly. Stainless steel electric equipment controlling case, controlling adopt to Japanese OMRON PLC. Adopt to advanced man-computer Interface auto controlling technology, key electric component all adopt to international famous industrial brand.

Sachet Water Packaging Machine

Sachet Water Packaging Machine

Product Description: Features Back seal-packing method, valve piston pump filling meter Film disinfection, liquid disinfection The finished packed products are elegant and reliable, hygiene and security. It can automatically finish making-bag, metering, filling, sealing, cutting, counting. and printing batch numbers. The body and the parts touching the material are made of stainless steel. Suitable material It is applicable for packing liquid like milk and soymilk.

Standup Pouch Filling and Sealing Machine

Standup Pouch Filling and Sealing Machine

Product description: Technical parameters: Model AK-STB Packing Speed 1500-2000 pouches/h Filling volume <500ml Power using 3 phase 4 lines (380V50HZ) Motor power 0.75kw Air pressure using 0.5-0.7Mpa Max air consumption 0.45m3/min (external link air sourse) Dimension 2000*2240*1900mm Weight 1500kg

DGF Carbonated Beverage Filling Machine

DGF Carbonated Beverage Filling Machine

Product Recommendetion: this machine is mainly used for washing, filling capping carbon dioxide drink such as cola ,soda water and so on,The machine design is shorten the time for the drink material contact with outside,Incrensed the sanitation condition and throughout and economy benefit. Capability Character: It adopts hanging type conveying-bottle structure to make changing bottle model more convenient, faster and more east. The main machine adopts advanced PLC control technology. The key electric elements adopt international famous products.

CGF Drinking Water Washing-Filling-Capping Machine

CGF Drinking Water Washing-Filling-Capping Machine

Specifications Non-carbonated Water Filling Machine 1,Product: Water 2, Bottle:PET 3,Capacity: 2000-40000BP(500ml) 4.Fully Automatic, for 0.5 to 2L 5,CE, UL, SGS, ISO, FDA CGF series Non-carbonated Water Filling Machine apply to the production of mineral water, purified water, flavor water and low alcoholic drinks, etc. Filling line includes: Water treatment Blow molding machine Unscrambler Air conveyor Rinsing-filling-capping 3-in-1 monoblock Sleeve / OPP labeler Air dryer, visual inspection, ink jet printer Shrink wrapper / wrap-round case packer Palletizer Etc. Water Filling Machine/ Filling Machine The water filling machine is mainly used in the beverage filling operations. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic. The machine is used in filling juices, mineral water and purified water in bottles made of polyester and plastics. The machine can also be used in hot filling if being installed with temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles. The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machine is higher than the machinery of the same specifications. The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably

Water Treatment System Plant

Water Treatment System Plant

The use of multi-medium quartz sand filters, main purpose is to remove the water contains sediment, manganese, rust, colloid material, mechanical impurities, suspended solids and other particles in the above 20UM of substances hazardous to health. Second stage pretreatment (Carbon filter) Activated carbon filters used to remove the pigment in the water, smell, a large number of chemical and biological organisms, reducing the residual value of water and pesticide pollution and other harmful pollutants. Third stage pretreatment (Resin softener) Cationic resin used for water softening, primarily to remove hardness of water. So as to effectively prevent the reverse osmosis membrane fouling. System can automatically recoil, and so is red. Fourth stage pretreatment (Micron filter) Particle size in water to remove fine particles, sand filters can remove very small colloidal particles in the water, so that the turbidity reached 1 degree. The Reverse Osmosis device is an equipment to purify the saline water with the action of pressure difference of semi-permeable membrane. It is called reverse osmosis, as it is counter to natural penetration direction. Difference materials have different osmotic pressures. The reverse osmosis can remove more than 97% of the soluble salt and above 99% of the colloid, microorganism, particles and organic materials, becoming the best first-choice choice equipment in the engineering of modern purified water, highly purified water and space water (super-purified water). The most highlighted features are low energy consumption, no pollution, simple technique, high-quality water and convenient operation and maintenance. RO with reverse washing tank-RO is the heart of water treatment system,so we prepared the washing tank with clean the inside of RO to make the RO membranes work longer. UV Sterilize It uses the UV to kill some bacteria that may also pass through the reverse osmosis system. Disinfect tubes adopt high-quality stainless steel, the material with high efficiency which can get rusty reflection have to ultraviolet ray, will not produce pollution while using, accord with the hygienic requirements of food industry. Tube built-in ultraviolet lamp and quartz glass tube, disinfect tube for air tight container Ozone Sterilizer Some bacteria may not be killed by UV, the sterilizer uses ozone to kill those bacteria. We use stainless steel 316 for ozone tower, as it can resist Ozone very well than SS304, the working life will be much longer. Features 1.Technology corona discharge quartz ozone cell 2.Adjustable Ozone output 3.Cooling way: advanced water-cooling 4. Inner air compressor and refrigerant dryer 5. Inner PSA oxygen generator unit

Carton Wrapping Machine

Carton Wrapping Machine

Facility basic summary and requirement The machine adopts to servo location, PLC controlling, auto operation, main drive adopts to import motor drive, multi-degree rotation via chain, chain wheel speed regulator etc. It auto degree is high, reliable controlling, easy to adjust, intelligent manipulation etc. advantage, can be widely used for beverage, beer, chemistry, food, medicine etc industry, can do all kinds of tin and bottle second-time packages, can match with auto filling production line. 2. Main parameter Product capacity:25carton per minute Rating power: 10KW Used power supply: three-phase, 380V, 50Hz Controlling power supply: 24V DV Compressor air:1500L per minute, 0.6-0.8Mpa Hot melting glue solidify time: 1.5-2S Machine weight: 3500kg Overall size: L6285*W2582*H2115MM Bottle entry conveyor size: L3000*W620*1200MM Package product overall size: Length 350-450、Width 230-330mm, Hieght:85-320mm; Package bottle diameter: D55-108MM Cardboard requirement: accord with international GB/T6544-2008 Facility basic summary and requirement:

Full Automatic Blow Molding Machine

Full Automatic Blow Molding Machine

Product description: Features: Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used for producing the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle, wide-mouth bottle and hot filling bottle etc. *Reasonable design, full automaticlly control, save power and labor. *Feeding system carries the preforms by robot arms automatically. *Infrared oven heater adopts the quartz lamp to heat the PET tube. *Fully automatic process with low investment, high efficiency,quick and safe for operation, easy for maintenance. *We have perfect service after sales . *Adopting high quality components.

Automatic Bottle Unscrambler

Automatic Bottle Unscrambler

Device Features: Automatic Bottle Unscrambler is the introduction of foreign advanced technology, according to China high-speed beverage filling equipment, the direction of development needs, development, development of a leading domestic level with a row of bottles of equipment. the main features of the main motor reducer with torque limit agencies, in order to prevent damage to equipment failure. Two-row of bottles of elected bodies, to ensure that each station has a bottle off the bottle and improve the efficiency of a bottle. Using hanging bottle conveying duct to prevent the overturning of the bottle in the transportation time. Remove body with broken bottles. Equipped with card bottle detector, the card automatically shut down bottles and alarm. With no bottle detector, used for a hoist to issue a signal to hoist will automatically add the bottle. Bottle conveying air paths and is equipped with photoelectric switches, for controlling the start-stop Unscrambler. Unscrambler with injection nozzle, can be easily addressed to gears, bearings and cam lubricant filling. Has a maintenance gate and mold to replace the door. Main electrical components (inverter, PLC, photoelectric switches, relays) are used MITSUBISHI, OMRON, SIEMENS and other components. Pneumatic systems are used imports. Bottle unscramble--- LP-12

Beverage Mixer

Beverage Mixer

Product description: Specifications beverage mixer material: SUS304 CO2 content:3.5 Output:7T/H beverage mixer features (1)This beverage mixer adopts advanced gas-liquid mixing device, can mix syrup, water and CO2 gas at the same time for filling machine. Also it can apply to thin beer, aerate for beer and produce sparkling wine. (2)This mixer is advanced in technology, even in mixing, reliable in performance, compact structure, easy in operation. It is suitable for aerated beverage firm of large, middle or small scale.

Rotary Automatic Blow Molding Machine

Rotary Automatic Blow Molding Machine

Features: *High productivity:1400pcs/cavity/hour. *High eligible rate: above 99.5%. *Power saving: heater is fixed with link of short section(pitch43.8mm), which assures to heat more preforms with the same heating length. In this way, it saves electricity of 25%. *Adopting SIMENS electric controlling system with high precision and fast speed.Stable function: blowing system adopts Germany valve and cylinder, which has stable and accurate stretching speed and good product consistency. *Mold fixing structure assures fast mold fixing speed and fast mold changing speed. *Automatic plastic loader and automatic recovery device. CM-G series composed by mechanical, electrical and pneumatic assembly with the latest international high technology. They are automatic, stable, safe, efficient, with speed of 14,000BPH and no contamination in the process.

Cold Glue Labeling machine

Cold Glue Labeling machine

Product description: AK-B-type glue labeling machine for labeling of plain paper label, the label on the back of the brush automatically paste (cold glue), will be on the labels to round bottles. It adopts frequency control, speed adjustable. This machine is suitable for frequent replacement of the label formatting and bottle paper labels, containers and labels of similar size without replacement parts, just make adjustments for the production. Production (bottles / min): 40-100 bottle size (mm): ф30-80 (according to customer request) Dimension (mm): 1800 × 760 × 1200 Label Length (mm): Length 40-110mm width 20 -50mm

AK-250A Automatic Shrink Packaging Machine

AK-250A Automatic Shrink Packaging Machine

Specifications Shrink Wrapping Machine 1-Capacity:24000b/h 2-Pack type:PE,without tray 3-Flim width:<600mm 4.L1200 x W600 x H400mm Technical parameter: Facility model: AK-250A Facility overall size: L12000×W1100×H2100mm Facility overall size: Main equipment:L12000×W1100×H2100mm Shrinkage machine:4200×1100×1700mm Wrappage max size:L2400×W650×H450mm Shrinkage film material: PE Shrinkage film thickenss:0.03-0.15m Thermo shrinkage tunnel max temperature: 160 - 260° adjust at will Max output per minute: 16-20 bag Facility power:35Kw Actual power:20Kw/h Pressure requirement: 380V/50-60HZ Facility weight: 2500 Air pressure: 0.6-0.8mpa Working noise:≤65db Import bottle convey belt width: 541mm Fan:1.1Kw 3set 380V, 60W 6set 380V OMRON : PLC controlling system WEINVIEW:Touch Screen Taiwan Airtac pneumatic component 1set Taiwan Telta transducer 2set Stainless steel wing heating tube 12pcs China-USA cooperation Teflon convey belt. South Korea Autonics photoelectrical switch, approach witch Thermo sealing knife aluminum casting heating board, even temperature, long usage life, our company special production. Whole machine appearance plastic spray, machine rack adopt to high-quality carbonated steel, main part adopt to stainless steel. Wooden case and wrappage film separate package. Product instruction Frequency converter speed adjust、two segment convey device. Bottle pushing, thermo sealing and cutting whole movement adopt to pneumatic fracture. Proximity switch control film length Touch screen, PLC system greatly increase facility movement reliability. Three-wind recycle fan machine, ensure shrinkage tunnel inside even temperature. Super big wind-volume cooling system, ensure quickly get into shape . Anti-high temperature teflon convey belt, convey steadily, high-strength anti-abrasion. Frequency limitless speed adjust convey belt frame. Convey belt height can make according client requirement, adjust range:±100mm Wing stainless steel heating system, endurance Meet with product instant stop requirement product-bearing rack device ensure production line consistency.

Injection Molding Machine

Injection Molding Machine

Product Description: AK injection molding machine injection molding system capacity from 200 tons to 500 tons (2000 kN to 5000 kN), injection up to 72 cavities. General Features: 1) Single-station injection molding plastics to ensure a sufficient quantity; 2) Mechanical hand cooling plate with three-position from the characteristics of the work, to ensure a sufficient cooling time, thus shortening the cycle time; 3) Internationally renowned high-quality parts and auxiliary equipment to ensure higher speed and precision. 4) Special screw design, improved torque while the shear force, thereby preventing damage to the machine. 5) International quality Accumulator increases performance while reducing energy consumption; Standard Machine Features: 1 Are both force force template template clamping force can be evenly distributed in the template surface. 1) 10-30% lower clamp tonnage 2) Reduced die wear 3) Improve the quality of injection molded parts 2. Injection Units demark system and single-stage single screw injection unit for economical production of small batch applications. 3 AK-based control device controls the overall management of PET production capability of the system, with optional integration of data packets to the downstream product handling equipment and auxiliary equipment. Benefits include: 1) A shorter production cycle 2) More precise identity 3) By ServiceNetLink remote connections 4) Through a single interface to control the molding system and auxiliary equipment 4 Linear Bearings Linear bearings on the machine base directly support the moving platen. This design improves the template alignment and verticality, which helps to reduce mold wear, but also to create a grease injection without the use of the environment.

Steam Tunnel

Steam Tunnel

Description 1. New type bottle label steam shrinkage tunnel, regarding the different and abnormal round, square, flat bottles etc bottle type adjustment and maintenance is convenient, and shrinkage is flat. 2.Steam eject type adopt to Steam drums design type, adjustable steam diversion kerb system, tube is smoothly and does not occupy room, eject exit mouth each side divide three passage, each passage height or low, fore and after gas output volume all can adjust up to max perfect efficiency. 3. Low-pressure Steam drums adopt to the no-seam steel tube, each connected tube use stainless steel tube quick connecter, easy to discharge and install. 4.Whole machine outer Sheel adopt to stainless steel SUS304, save energy and accord with foodstuff safe criterion. 5.Bottom stainless steel water plate concentrate cool condensation water, can exclude via tube connected, working circumstance do not affect, case body vision window fore and after each has two. 6. Whole machine adopts to water-proof design, made from stainless steel, easy to manipulate and maintain. Technological parameter: steam use volume:28Kg per Hour Steam pressure:0.3~0.45MPa Bottle diameter:≤130mm Bottle Height: ≤330mm Production Capacity:≤600BPH ST-1800 External size:1800*450*1700mm (L*W*H) ST-2300 External size:2300*450*1700mm (L*W*H)

QGF600 Filling Machine

QGF600 Filling Machine

Product description: Specifications 1. Product: Water 2. Bottle: Plastic 3. Capacity: 600BPH 4. Fully Automatic, for 3 to 5Gallon 5. CE, UL, SGS, ISO, FDA Pure water filling machine QGF series barreled production line consists of washing, filling and capping . It is suitable for filling of all kinds of round and square barrels. The production line adopts electric-program control. It has safe devices, such as interlock and their quality is reliable. The whole machine is made of stainless steel. It meets the demands of food hygiene. Its structure is reasonable and operation is convenient. It is an ideal equipment for producing mineral water, super –pure water, space water, and distilled water.

Can Filling Production Line

Can Filling Production Line

Product Description: Detail: This kind of production line is mainly used in washing, filling, and cover sealing for easy pull cans made of tinplate, aluminum alloy, or plastics. It has such functions as automatic lift, automatic turnover, filling, and cover sealing for heaps of empty cans, it is output is very large. It is the best production facility for producing aerated beverages.

AK-450B High Speed Carton Wrapping Machine

AK-450B High Speed Carton Wrapping Machine

Advanced Automation: The machine adopts Siemens centralized control system combined with the human-machine interface, and improved wrapping of various control functions, the key points are set to the electronic monitoring device. High productive efficiency: the machine's main drive with a SEW company imported servo motor and self-lubricating polymer with a low-wear chain, smooth, low noise, and high productivity. Simple: This machine is fully automatic production, and automatically adjusts the servo controller is equipped with production speed and synchronous operation of the entire production line. Reliable hot melt equipment: the machine used by the U.S. Nordson hot melt machine, is easy to operate, and durable. After it is a packaged product, keeps its shape, appearance, storage, and transportation convenient. Reasonable structure: The machine consists of a reasonable mechanical structure, reliable pneumatic devices and advanced electronic control technology components, advanced technology, a simple structure. Specifications: Capacity: 20 to 60 cases/minute; step-less adjustable. Total power: 16KW Overall dimensions: L × W × H = 11770 × 4112 × 2600 (mm) Machines with compressed air pressure: 0.4 ~ 0.7Mpa, Air Consumption: 0.2NM3 / min. Suitable for bottles and cans outside dimensions: diameter φ60 ~ 90mm, height of 120 ~ 300mm. Packing arrangement in the form: 3 × 4; 4 × 6 (or according to customer requirements) Weight: 6000Kg

Automatic Blowing Mould Machine

Automatic Blowing Mould Machine

Adhesive Labeling Machine

Adhesive Labeling Machine

Product Description: Machine-wide adoption of a mature technology PLC control system, so that the whole stable, high-speed Operating system using touch-screen control, simple, practical, efficient An upgraded version of the three-dimensional angle adjustment of the standard station design may be adapted to tapered bottles An imported servo control system can be chosen, which is stable and high-speed Screw adjusting suppression body movements accurately Synchronization chain agencies, to ensure stable and accurate calibration Labeling transparent labels without bubbles and self-adhesive labels without wrinkles The use of a wide range of a multi-purpose machines and adaptable The scope of the application Multi-function automatic labeling machine to label round bottles, square bottles, tapered bottles, and flat bottles(in food, medical, daily chemical industry, and other industries).

Blowing Mold

Blowing Mold

Cooling water tank and chiller

Cooling water tank and chiller

Product Description: Specifications It is composed of a water cooling tank and chiller; it is used in the carbonated drink line Cooling water tank beverage machinery line Product Description: 1. It is composed of a water cooling tank and chiller; it is used in carbonated beverage production line and sparking wine. 2. This product contains a compressor using Freon F-12 or F22 as a Refrigerant and a pressure sensor and temperature regulator for automatic control. 3. It is used to cool the water before mixing which is connected with the mixer. Cooling water tank beverage machinery line

Industrial Detergent Soap Paint Powder Mixing Tank Liquid Mixer Agitator Machine

Industrial Detergent Soap Paint Powder Mixing Tank Liquid Mixer Agitator Machine

Mixer Type: Homogenizer Barrel Volume (L): 50 L-2000 L Material Processed: Chemicals, Food, Medicine Max. Loading Volume (L): 2000 L Range of Spindle Speed(r.p.m): 1 - 65 r.p.m Max. Loading Capacity: 2000 L Weight (KG): 350 KG Material: SUS304, SUS304L, SUS316, SUS316L, SUS304 Condition: New Application: Liquid, Liquid Blending

HP air compressor

HP air compressor

CGF Drinking Water Washing-Filling-Capping Machine

CGF Drinking Water Washing-Filling-Capping Machine

CGF series Non-carbonated Water Filling Machine applies to the production of mineral water, purified water, flavor water, and low alcoholic drinks, etc. The filling line includes: Water treatment Blow molding machine Unscrambler Air conveyor Rinsing-filling-capping 3-in-1 monoblock Sleeve / OPP labeler Air dryer, visual inspection, inkjet printer Shrink wrapper / wrap-around case packer Palletizer Etc. Specifications Non-carbonated Water Filling Machine 1. Product: Water 2. Bottle: PET 3. Capacity: 2000-40000BPH(500ml) 4. Fully Automatic, for 0.5 to 2L 5. CE, UL, SGS, ISO, FDA Water Filling Machine The water-filling machine is mainly used in beverage-filling operations. The three functions of bottle wash, fill, and seal are composed in one body of the machine. The whole process is automatic. The machine is used in filling juices, mineral water, and purified water in bottles made of polyester and plastics. The machine can also be used in hot filling if installed with a temperature controlling device. The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles. The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted. There the output and benefit of the machine are higher than the machinery of the same specifications. The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle-entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving the bottle forward steadily and reliably.

QGF300 Filling Machine

QGF300 Filling Machine

Product Description: Specifications: 1, Product: Water 2, Bottle: Plastic 3, Capacity: 300BPH 4. Fully Automatic, for 3 to 5Gallon 5, CE, UL, SGS, ISO, FDA Pure water filling machine QGF series barreled production line consists of washing, filling, and capping. It is suitable for the filling of all kinds of round and square barrels. The production line adopts electric program control. It has safe devices, such as interlock and their quality is reliable. The whole machine is made of stainless steel. It meets the demands of food hygiene. Its structure is reasonable and operation is convenient. It is an ideal equipment for producing mineral water, super –pure water, space water, and distilled water.

AK-100A Shrink Packaging Machine

AK-100A Shrink Packaging Machine

Product Description: Facility type: AK-100A The external dimension of the facility: L2500×W830×H1880mm Max. Dimension of wrappage: L560×W300×H300mm Shrink film material: PE/PVC/POF Shrink film thickness:0.06-0.12mm Thermo-shrink tunnel Max. temperature: 160-230( can be adjusted freely) Max. output per minute: 0-5pcs Facility power: 18Kw Actual power: 15Kw/h Voltage: 380/220V Facility weight: 0.65T Fan: 40w 220V 2units,120w 380V 2units

Vacuum Autoloader

Vacuum Autoloader

Glass Bottles Filling Machine

Glass Bottles Filling Machine

Usage Characteristic: BCGF Series Machine is used in glass bottle beverage production. The applicable bottle includes Aluminum cap glass bottle, Crown cap glass bottle, and Plastic cap glass bottle.

Crusher

Crusher

Semi-automatic CIP Clean System

Semi-automatic CIP Clean System

Product Description: Specifications cip system has such advantages as energy-saving, high efficiency, operator safety, and ease of operation and maintain CIP (cleaning-in-place is designed for automatic cleaning by recirculation detergent and rinse solutions without major disassembly and assembly work. 1. the CIP system can be designed to clean one part of the plant while other areas continue to produce the products. the CIP systems provide reserviories for detergent and rinse solutions as well as pumping and heating capabilities for the solution. computer control handles the programs sequences of washing and rinsing material recycled through the vessel, pump, valves, and other process equipment in the flow system. 2. the cleaning can be carried out with automated or manual systems and is a reliable process that meets the stringent hygiene regulations demanded by the food, dairy, beverage, biotechnology, and pharmaceutical industries. 3. cip system has such advantages as energy-saving, high efficiency, operator safety, and ease of operation and maintenance. CIP cleaning device provides manual, semi-automatic, and automatic modes for customer selection.

Automatic Bottle Inverted Sterilizer

Automatic Bottle Inverted Sterilizer

Specifications Steady and reliable; No harm to bottles; Frequency conversion control; The conveying chain speed is adjustable. It is suitable for tea, and fruit juice drinks, mainly used for the sterilization of filled bottleneck and mouth and which could not be touched by high-temperature products completely after hot-filling and capping, the filled bottles are inverted by 90 degrees, automatically. It sterilizes the caps inner wall and then stands vertically automatically again. Main Technical Data Production Capacity:100~250 b/min Application Scope: Plastic bottles, Glass bottles Sterilizing Time:10-40 s Conveying chain belt speed:4.5-25 m/min Motor Power:1.5 kw

LP air compressor

LP air compressor

AK-100B Cable Shrink Packaging Machine

AK-100B Cable Shrink Packaging Machine

Product Description: Technical data: Facility type: AK-100A The external dimension of the facility: L5050×W1120×H2100mm Max. Dimension of wrappage: L600×W320×H400mm Shrink film material: PE Shrink film thickness: 0.06-0.12mm Thermo-shrink tunnel Max. temperature: 160-230°( can be adjusted freely) Max. output per minute: 0-6pcs Facility power: 18Kw Actual power: 15Kw/h Voltage: 380/220V Facility weight: 0.65T Fan: 40w 220V 2units, 120w 380V 2units The general specification of the machine Pneumatic component 1set Speed adjustment motor 1 set Stainless iron wing-type heating tube Stainless steel convey belt Thermo sealing knife cast aluminum heating board has the character as even temperature, and long life, and is our special product. The whole machine is outer plastic-sprayed, the frame is made of high-quality carbon steel, main part adopts stainless steel. Wooden case and wrappage film packed separately.

Air Cooling Drier

Air Cooling Drier

Product Description: Specifications air compressor drier used a single-chip system as its control panel have high efficiency maximum life lowest operation costs air compressor drier is designed to work in many fields as an air treatment system in different industrial sectors where high reliability and lasting working hours are required its technical highlights are as follows: 1, low dew point design:2 degC 2, water separation system to improve the separation system efficiency, better than the conventional separation system. 3, controlling the system to keep all the system components/ parameters at an optimal level. Functions such as displaying, and warning systems. 4, The long-term practice has proved that the contour design conformsto the ergonomic principle,which will help the operator work with great ease and convenience. 5, highly reliable refrigeration allocation scheme to help accommodate the variation in environment and steam disposal volume, and to maintain reliable operation under high-temperature and high-humidity conditions

Color Mixture

Color Mixture

Washing-Filling-Capping Production Line

Washing-Filling-Capping Production Line

Clean room

Clean room

Product Description: Specifications clean room one package service For the food industry, electronic medical, biotechnology fine chemical clean room Introduction For the clean room, we manufacture various air showers, clean work station, transfer windows, and purification projects of the design, production, installation, debugging, and production of air purification equipment, and other we supply the train services for the clean room. Use Our clean rooms have been widely used in food and beverage, electronic, medical, biotechnology, fine chemicals, medical equipment industries… Full processing equipment, advanced technology, scientific management, strict implementation of ventilation and air conditioning and air purification standards for the national norms, the entire process is by the ISO9001 quality system management, and our products have a good reputation on markets.

Automatic CIP Clean System

Automatic CIP Clean System

Product Description: Specifications The CIP system made of stainless steel four tanks for the cleaning solution mounted as a whole system easy to move The CIP system is installed on a frame and supporter which is easy to transportation, especially for exporting; The operating principle of the full auto CIP cleaning system means that the tank body, pipelines, pump,s and all valves, and also the whole processing line are cleaned on line no need to disconnect the pipes or the equipment, all cleanings are done at the closed circuit. Main components: CIP cleaning liquid storage tanks(include acid tank, alkali tank, hot water tank, clear water tank); Two not-big storage single-layer tanks for concentrated acid and alkali. CIP forward and return pumps. two diaphragm pumps for acid/alkali concentrate. heat exchanger(plate or tubular type) One electrical appliance box One set of controlling pipe and valve components. One set of auto-performance components and parts and the electrical appliance material. CIP cleaning liquid storage tank: 1000L-10000L. According to the customer's requirements, we can make double circuits, three circuits, four circuits, and so on, meanwhile, we can make multi circuits operate at the same time. The Heating way: plate type, coil tube type, tubular type. System control elements: This system adopts the PLC program to control, with the colored touch --screen to operate and display the whole process flow and also each controlling parameter. The temperature of the cleaning liquid can be installed. It can set the PH value, the cleaning time, the cleaning sequence, and also the refluence PH value. With the system malfunction alarm device. The operating principle of the system: 1. Auto-flow control for the cleaning solution 2. Automatically regulate the temperature of the cleaning liquid. 3. Auto-compensate for the inside tank liquid level. 4. Automatically-compensation for the acid and alkali concentration. 5. Auto transfer from one cleaning liquid to another. 6. System auto alarm-device The main description for the CIP cleaning system is as follows: The CIP Cleaning system is to carries out circulation cleaning under the condition that no need to open the equipment(tank, pipe, pump, valve, etc.)and the whole production line. The CIP system is controlled by Siemens PLC, a full-auto controller. The plate-type heat exchanger will heat online, The concentration test of acid alkali, the upper and lower liquid level of the tank, control valve, all use imported products with high quality. the CIP system is full-auto operation control. We are looking forward to hearing from you.

Mold Chiller

Mold Chiller

Product Description: Specifications Installed with precise electronic thermostat accurately maintains temperature within 5 degrees to 7 degrees. The industrial chiller has the following features: 1. The industrial chiller is divided into two categories: water-cooled chiller and air-cooled chiller. The water-cooled chiller is cooled by water, using with cooling tower and water pump, the other is cooled by a fan, which can be used independently. 2. Our compressor is imported from Italy, France, and so on, being of high-quality built-in safe protection, with low noise, the electricity of the province is durable. 3. Cooling capacity range: 9.8kw~189kw 4. Normal conditions: Chilled water inlet temperature is 20 degrees, and outlet temperature is 15 degrees. The cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in the 5-30 degrees range according to customers’ request,and the lowest temperature can arrive at -25 degrees. 5. Stardard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: ± 10%, allowable voltage difference in phase: ± 2%,Can also be customized according to customers request 6. The number of compressors can be one or two, each compressor is an independent refrigeration system. Each other runs independently. When the one is working, the other can be working or not. 7. The number of compressors can be 1 to 4, each compressor is an independent refrigeration system. Each other runs independently. When the one is working, the other can be working or not. 8. Use PLC microcomputer control from France Schneider, both English and Chinese human-machine interface. 9. Wide range of variable chilled water temperatures to meet the industrial requirements throughout the whole year. 10. Our standard refrigerant is R22, but you can choose to use environmental refrigerant such as R407C , R134A or R507.

Line Filling Machine

Line Filling Machine

This is a high-tech filling equipment integrating the PLC microcomputer programmable control, and photo electricity transduction pneumatic action. The machine is especially suitable for foodstuff. Examples: white spirit, soy sauce, vinegar, seasoning, vegetable oil, syrup, mineral water, edible liquid as well as chemical liquid. It has accurate filling measurement; there is no bubble or drop. It suits for the filling of all kinds of bottles (including irregular bottles) ranging from 25 to 10000 ml. Technological parameters: Range 25-10000ml Speed <120bottles/minute (for 50-500ml) Measurement precision ±1% Rated power 0.8KW Working voltage 220V Working air pressure 6-7kg/cm² Air-consuming amount 0.5m³/minute Net weight 650kg Contour Sizes 2000×870×1900mm

Spray cooling sterilizing tunnel

Spray cooling sterilizing tunnel

Product Description: Specifications Spray cooling sterilizing tunnel 1.capacity:0.5L PET 18000 Bottles/h 2. material: Stainless steel 3.temperature:15-30C Spray cooling sterilizing tunnel 1, Capacity:0.5L PET 18000 Bottles/h 2, Temperature:15-30C Treating time:18-20min 3, Bottle diametre: F50-F110 Height:370mm 4, Available treating area:9.3m2 5, Power:9.55kw Motor:0.55kw Conveyor motor:0.75kw=1.5kw Pump motor:3kw+1.5kw=7.5kw 6, A, Water consumption for start 5.4T B, water total consumption:30-50kg/H C, refrigeration towel:28m3/h (self-built) 7, Overall dimension:7000*1500*(1760-1870) 8, working height: H=1250mm 9, Weight:2T

AK-20C Cup Filling Machine

AK-20C Cup Filling Machine

This machine is applied to the liquid storage in plastic cups, bowls box container filling, and sealing. Such as fruit juice, milk, mineral water, etc. This series machine automatically drops the cup, automatic filling, and sealing, there are optical devices, to ensure the sealing pattern on the positive There are many specifications, for different shapes and capacities of containersCan be based on user needs, increasing calcium tablets, and solids such as fruit filling, and can print the date of devices installation

Water Cap

Water Cap

AK-S250 Sleeve Labeling Machine

AK-S250 Sleeve Labeling Machine

Whole machine has agreat quantity of stainless steel and good-quality aluminium alloy,reasonable fracture、compact, convenient to adjust; The shrinkage film volume label rack, match the adjustable device, convenient to adjust according to different volume label 5″~10″paper tube. Simply installation, then can be convenient for square and round bottles. No need for an instrument, the rotary mechanism is convenient to adjust, and apply to different bottle types. The unique sleeve labelling method, adopt to the pressing sleeve labelling method, is not only convenient but also reasonable. Auto-controlling feeding system, level-off shrinkage film materials and regulate/adjust strain simultaneity. Unique design knife plate, within specification scope, can avoid changing knife base, knife changing is quick and convenient. Middle guide-pole clip system, mould changing is more quick, no need for any instrument. Label location system can promote and demote in-phase adjust location according to specific bottle type requirements. Adopt to Japanese import servo system and high-sensitivity photoelectric, label cutting precision is high. Stainless steel electric equipment controlling case, controlling adapt to Japanese OMRON PLC. Adopt advanced man-computer Interface auto controlling technology, key electric components all adopt to international famous industrial brand.

Shrink Film

Shrink Film

Juice Cap

Juice Cap

Mixing  Tanks

Mixing Tanks

Product Description: Specifications 1. Tank, used in food, dairy, beverage, pharmaceutical mixing, etc. 2.volume:50-8000L 3. SUS 304,316. 1. Tank apply to cosmetics, food, chemical, and pharmaceutical This mixing pot applies to mixing, homogenization, dispersion, heating, cooling, circulation, pump materials, and other functions are all one, it is the ideal equipment for producing lotion, cream, cosmetics, etc. 2. Performance and characteristics (1). With a high-speed dispersion device and strong mixing viscous dispersion of solid and liquid materials; the main stirring with variable speed device, can reduce the formation of bubbles when high viscosity under low temperature, the gear pump can cyclic discharge, so it can speed up the product formation and discharging. (2). Apply to 304, and 316 stainless steel as material, polish treatment applied to the inner and outer surface of the tank, and all connection points adopt rolling and annular rolling and annular welding. Avoid angle welding, without any dead comer, easy to clean, equipped with an entry hole for man and air-filler, tank volume.

Pure Water Factory Lab Equpment

Pure Water Factory Lab Equpment

Torque measuring instrument

Torque measuring instrument

PRODUCT DESCRIPTION DTG-20N Torque Meter/Measuring Instrument for Torque Test is applicable in open force and lock force tests of cups of bottles, suction, and flexible tube packages. The open and lock forces of bottle caps are important online or offline technical parameters of production and will influence the transportation and consumption of the products. Torque Meter/Measuring Instrument for Torque Test is a professional instrument for the open force and lock force measurement of bottle products. Torque Meter/Measuring Instrument for Torque Test is stable and precise, a necessity of the manufacturing process. CHARACTERISTICS Micro-computer control, LCD, PVC operation board; Automatic peak value keeping; Two modes for lock force and open force; Standard testing units; Auto zero, error alert, overload protection; Memory while power failure; Mini-printer; RS232 interface;

Mix Tanks

Mix Tanks

Product Description: Specifications 1. Tank, used in food, dairy, beverage, pharmaceutical mixing, etc. 2.volume:50-8000L 3. SUS 304,316. 1. Tank apply to cosmetics, food, chemical, and pharmaceutical This mixing pot applies to mixing, homogenization, dispersion, heating, cooling, circulation, pump materials, and other functions are all one, it is the ideal equipment for producing lotion, cream, cosmetics, etc. 2. Performance and characteristics (1). With a high-speed dispersion device and strong mixing viscous dispersion of solid and liquid materials; the main stirring with variable speed device, can reduce the formation of bubbles when high viscosity under low temperature, the gear pump can cyclic discharge, so it can speed up the product formation and discharging. (2). Apply to 304, and 316 stainless steel as material, polish treatment applied to the inner and outer surface of the tank, and all connection points adopt rolling and annular rolling and annular welding. Avoid angle welding, without any dead comer, easy to clean, equipped with an entry hole for man and air-filler, tank volume.

Semi-automatic Bottle Unscrambler

Semi-automatic Bottle Unscrambler

AK8000R Series Volumetric Filling Machine

AK8000R Series Volumetric Filling Machine

Product Description: TNG8000R Series Volumetric Filling Machine This machine adopts linear filling, and electromechanical integration control, and is of superior performance, whose modeling complies with the international mechanical design concepts. It is mainly applicable to a variety of viscous, non-viscous, corrosive, and non-corrosive liquids, and is widely used in the quantitative small packages of vegetable oil, lubricants and chemical liquids, and routine chemical industries, etc. ■ Configuration and performance, features: 1、Adopt German original SIEMENS (Siemens) PLC control to ensure the performance stability of the system. 2、Select imported electricity, and pneumatic control components, with stable performance. 3、Photoelectric detection system adopts German products, with reliable quality. 4、The leading anti-leakage devices ensure that no leakage occurs in the course of production. 5、For step-by-step delivery, the primary-section delivery adopts variable frequency control, of higher efficiency, while the following process (stamping, ink-jet printing, light-check, and case-sealing, etc) adopts special double dislocation connection, allowing the whole production line more accurate and smooth. 6、High and low double-speed filling can avoid the overflow phenomenon, and can significantly increase production efficiency. 7、Single-machine is adapted to multiple varieties, quick and easy adjustment. 8、The humanization control system has intelligent protection functions. In case of a fault alarm, it will display the reasons for faults to ensure the safety of the production process. 9、Electrically adjustable capacity system has a real-time data tracking function, which allows touching the screen setting to realize the replacement of species, accurately, conveniently and quickly. 10、According to users’ demand, automatic covering machine, automatic continuous capping machine, spinning and covering dual-use machine, leak detection machine, aluminum foil sealing machine, ink-jet printing machine, automatic unpacking machine, packing machine and pack - sealing machine can be affiliated to be used to form pipeline operations.

OPP hot melt labeling machine

OPP hot melt labeling machine

CO2 Generator

CO2 Generator

Product Description: CO2 Producing and purifying machine CO2 generator equipment can very quickly get CO2; Provide for carbonated drinks production Line.

Hollow Ultrafiltration Filter

Hollow Ultrafiltration Filter

Product description: Specifications 1. 304 SS or FRP tank 2. PLC automatic control 3. combined system, simple installation 4. application: water treatment The scope of business includes(WATER TREATMENT): 1) Separated water supply equipment in the building 2) Pure water and ultra-pure water equipment for the electronic industry 3) Water treatment for medicine, chemical, electric power, boiler 4) Water treatment for food, and drinking. 5) Water treatment for printing and dyeing and other industries. 6) Water reuse and recycling. 7) Water treatment for municipal administration and industrial waste water. 8) Sea water /alkaline water desalination Installation: Raw water pump +quarts sand filter + active carbon filter +ion softener system + micron filter+RO water purified system + ozone generator 1.0 Water feeding pump Requested access to the system is raw water has a stable flow and pressure, its purpose is to prevent water fluctuations that have an impact on the system operation to ensure the stability of the system into the water. 1.1 First stage pretreatment.(Sand filter) The use of multi-medium quartz sand filters, the main purpose is to remove the water containing sediment, manganese, rust, colloid material, mechanical impurities, suspended solids, and other particles in the above 20UM of substances hazardous to health. The effluent turbidity is less than 0.5NTU, CODMN is less than 1.5mg / L, iron content of less than 0.05mg / L, and SDI is less than or equal to 5. Water filter is a kind of "physical-chemical" process, the water through granular materials when isolated filter water impurities and colloidal suspensions. The filter is effective for water purification and treatment of the main process in the preparation of pure water is an indispensable process. 1.2 Second stage pretreatment (Carbon filter) Activated carbon filters are used to remove the pigment in the water, smell, and a large number of chemical and biological organisms, reducing the residual value of water and pesticide pollution and other harmful pollutants. The structure of activated carbon filters and quartz sand filters, the difference is placed inside the strong adsorption capacity of activated carbon for removal by the quartz sand filter without the filtering out organic material, adsorption of residual chlorine in the water, using water more than less than or equal to chlorine 0.1ML/M3, SDI less than or equal to 4, are strong oxidants chlorine, there are various types of membrane damage, in particular, reverse osmosis membranes are more sensitive to chlorine. In addition, in the activation process, the surface of activated carbon forms non-crystalline parts of some oxygen-containing functional groups, these functional groups can have chemical adsorption of activated carbon catalytic oxidation of bad news, to restore the performance, and can effectively remove several metal ions in water. 1.3 Third-stage pretreatment (Resin softener) The cationic resin is used for water softening, primarily to remove the hardness of water. The hardness of water is a major calcium (Ca2 +), and magnesium (Mg2 +) ion composition, when containing the raw water hardness ions through the resin layer, the water of the Ca2 +, Mg2 + was exchanged resin adsorption, and other objects at the same time the quality of the release of sodium Na + ions flow from the softener in the water is removed from the softened water hardness ions. To effectively prevent the reverse osmosis membrane fouling. System can automatically recoil, and so is red. 1.4 Fourth-stage pretreatment (Micron filter) Particle size water to remove fine particles, sand filters can remove very small colloidal particles in the water, so that the turbidity reached 1 degree, but still per milliliter of water for hundreds of thousands of particle size 1-5 microns colloidal particles, the pressure on this filter to remove water after the particle size of 100 microns or less in small particles, to further reduce the turbidity, to meet the next process of the water requirements of the protection of the next long-running processes. 1.5 RO system Using reverse osmosis technology for desalination, the reverse osmosis membrane was only 0.001-micron pore size, can be harmful to remove dissolved solids and bacteria, viruses, etc., desalination rate of more than 99.6 percent, in line with national standards to produce pure water, the host section contains the security filter, high-pressure pump and reverses osmosis membrane, security filters for the fourth grade and above pre-treatment systems, the high-pressure pump is the host of one of the core equipment for the reverse osmosis membrane elements to provide sufficient pressure to overcome the penetration resistance to pressure and run to meet the needs of a device to achieve the rated water.

RGF Juice Washing-Filling-Capping Machine

RGF Juice Washing-Filling-Capping Machine

Specifications Automatic Filling Machine 1. Product: Juice, Tea Drink 2. Bottle: PET 2.Capacity:3000-36000b/h(500ml) 3. PLC, touch screen, SS304 Automatic Juice Filling Machine Filling line includes Water treatment Blow molding machine Unscrambler Air conveyor Rinsing-filling-capping 3-in-1 monoblock Sleeve / OPP labeler Air dryer, visual inspection, inkjet printer Shrink wrapper / wrap-around case packer Palletizer Etc. Main Features: 1. Air Conveyor connects with bottle-in starwheels. Bottleneck holding transferred. 2. Clamp transferring technology varied bottle types. 3. With little abrasion. Stable Transferring. Easy to change bottles. 4. With ring type pressure bearing hydraulic cylinder. 5. With high filling speed and exact liquid level. 6. Excellent Stainless Steel. Electric Components are of world known brand. All achieve national sanitary standards. 7. The bottle-out starwheel is of screwdown shape. No need to adjust transferring the chain's height to different bottles. 8. Easy to operate and maintain. 9. PLC and transducers and othe main electric parts are of world famous brands, such as OMRON, MITSUBISHI, etc

Used HOWO 10wheeled tipper truck 6x4

Used HOWO 10wheeled tipper truck 6x4

Chassis Model = SINOTRUK HOWO ZZ3257V3847 Engine = WP12.400E201 Drive Model = 6x4 Fuel Type/Emission = Diesel, Euro II, Europe Transmission = HW19710, 10 forward & 2 rear Steering = ZF hydraulic steering with power assistance Front axle = VGD95,9.5ton load capacity Rear axle = HC16 ,16ton×2 load capacity Cab = HW76 cab, One berth, With air Rim/Tires = 315/80R22.5 Tire,11 pieces including 1 spare tire Fuel Tank = 300/400L Dump body dimension = 5600x2300x1500mm, middle lift = Floor 8mm, Side 6 mm

AK-KX01 Unpacking machine

AK-KX01 Unpacking machine

Product Description: Application: The machine can finish the work of carton opening, shaping, folding, and sticking the adhesive tape. It saves time and force. The machine can correct the right angle automatically. It is very easy to adjust the size of the carton and has wide usage. The machine has the function of easy operation to reduce the cost.

AK-150B Box Shrink Wrapping Machine

AK-150B Box Shrink Wrapping Machine

Technical parameter: Facility type: AK-150A Facility external size: L5050×W2800×H2100mm Wrappage max size: L500×W320×H400mm Shrinkage film size: PE Shrinkage thermo thickness:0.03-0.15mm Thermo shrinkage tunnel temperature: 160 - 260°can adjust at will. Max output per minute:8 bags Facility power:18Kw Facility weight:1.2T Facility Basic Configuration: Omron:5.7 inch touch screen, PLC controlling system Taiwan AIRTAC pneumatic component Taiwan Teco Frequency Inverter Stainless steel wing heating tube China-America Cooperation Teflon conveyor belt. Shanghai Hemei electric motor and Zhejiang Taili worm speed-regulation machine. South-Korea Autonics photoelectric switch, proximity. Thermo sealing knife aluminum-mold heating board, even temperature, long life, our company special production. The whole machine is plastic-sprayed, the machine rack adopts high-quality carbon steel, main part adopts stainless steel. Convey machine length:2600mm Product Description: Frequency converter speed adjust Bottle pushing, thermo sealing, and cutting the whole movement adopt to pneumatic fracture. Proximity switch control film length. Touch screen and PLC system greatly increase facility movement reliability. Double-wind recycle fan machine, ensure shrinkage tunnel inside even temperature. A super big wind-volume cooling system, ensure quickly gets into shape. Anti-high temperature Teflon convey belt, convey steadily, high-strength anti-abrasion. Frequency limitless speed adjust convey belt frame. Convey belt height can make according to client requirement, adjust range:±50mm Wing stainless steel heating system, endurance.

QGF900 Filling Machine

QGF900 Filling Machine

Product Description: Specifications 1, Product: Water 2, Bottle: Plastic 3, Capacity: 900BPH 4. Fully Automatic, for 3 to 5Gallon 5, CE, UL, SGS, ISO, FDA Pure water filling machine QGF series barreled production line consists of washing, filling, and capping. It is suitable for the filling of all kinds of round and square barrels. The production line adopts electric program control. It has safe devices, such as interlock and their quality is reliable. The whole machine is made of stainless steel. It meets the demands of food hygiene. Its structure is reasonable and operation is convenient. It is an ideal equipment for producing mineral water, super–pure water, space water, and distilled water.

Bottle Unscrambler

Bottle Unscrambler

Product Description: Introduction LP-200 Automatic Bottle Unscrambler is made up of a bottle elevator, round plate, bottle-reject, bottle-arranging parts, and the electrical cabinet. Put disordered bottles into the bottle elevator, through the round plate, conveying belts, and bottle arranging parts, then bottles can stand on the belts. This machine is characterized by its compact structure, simple operation principle, mature technique, and stable movement. Until the present, it has been widely used by the pesticide industry for many years--Syngenta, Shandong Binnong Technology Co., ltd China, QiaoChang Chemical, and HenanLianbao Co., Ltd. China and etc. Features: 2.1、Simple structure, easy operation, and convenient adjustment . While the other company’s same machine is larger than us, length over 3 meters and weighted too much. 2.2、When changing different size bottles, there is no need to change the model. Its applicable range is 50-1000ml bottles. You only need to adjust the belt in the bottle hopper and the space of the unscrambling structure. Main Technical Parameters: 1. Unscrambling Speed:≤ 200 bottles/min 2. Applicable Bottle Diameter:Φ45-90mm 3. Applicable Bottle Height:80-240mm 4. Air Pressure:0.5~0.7 MPA 5. Power Source:~220V、50HZ 6.Power:1.5KW 7. Bottle Unscrambler External Dimension:2600×1500×1500mm(L×W×H) 8. Weight: about 450Kg

AK-FX02 Automatic Folded Carton Sealing Machine

AK-FX02 Automatic Folded Carton Sealing Machine

Product Description: Application: Auto folding for the top lid ensures smooth and suitable sealing motions. The entire sealing operation is automatically performed, providing an elegant outlook and labor-saving, the machine can be operated together with an automatic packaging line.

Semi-automatic blow molding machine

Semi-automatic blow molding machine

Product Description: Features: The semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 0.1L to 2L. It is widely used to produce carbonated bottle, mineral water bottles, pesticide bottle, oil bottles, cosmetics bottles, wide-mouth bottles, etc. Adopting double crank to adjust mold, heavy locking mold, stable and fast. Adopting an infrared oven to heat the preform, the preform rotated and heated equally. The air system has been divided into two parts: pneumatic action part and bottle blowing part to meet the different requirements for the action and blowing. It can provide sufficient and steady high pressure for blowing large irregular-shaped bottles. The machine is also equipped with a muffler and oiling system to lubricate the mechanical part of the machine. The machine can be operated in the step-by-step mode and the semi-auto mode. The machine is small with low investment, and easy and safe for operating.

Three lines of wine filling

Three lines of wine filling

Features Main features The machine is mainly used for bottle-filling wine, soy sauce, vinegar, and other easy-foaming liquids with the same liquid level. Using the principle of low-vacuum filling, filling against the wall of the bottle, without choking wine or foaming, and ensuring the consistency of the liquid level after filling. Bottles with broken bottles will not automatically fill, sprinkle liquid, break bottles, and automatically adjust to bottle height errors. The elaborately designed bottle-holding device is well-selected and the materials are superior. The reasonable design, high-end processing technology, and accurate compression and shock absorption ratio ensure the service life of the bottle-holding device. The filling valve adopts the advanced filling principle of the filling industry, reasonable design, excellent quality, and precise processing parts to ensure the liquid level requirements after filling. Without disassembling the filling valve, just lift the valve upwards and turn it clockwise to 15 degrees to keep the filling valve in the normally open state. At this time, it is convenient to reverse the filling barrel and the filling valve rinse. The single-pin fixed valve body structure is adopted, and the pin core can be pulled out by pulling the pin shaft lightly. The principle is simple, and the maintenance is extremely convenient. The filling machine uses an imported high-sensitivity liquid level probe, an imported liquid level control device, and a pneumatic angle seat valve for wine intake so that the liquid level in the filling barrel can be controlled within 30mm. This device can realize the synchronous action with the wine inlet pump, and can also realize the liquid filling without the high-level tank. 1. Features of bottle washer (1) Adopt the process of grasping the bottle, turning the bottle, flushing the bottle, controlling the bottle, turning and resetting, discharging the bottle, and other processes by the elastic strong manipulator to realize fully automated production. (2) Continuous tracking bottle flushing has high efficiency and stable and reliable flushing effect. (3) Adopt an internationally famous brand inverter frequency conversion speed regulation, the speed is free to master. (4) With The introduction of foreign advanced technology, the developed flip manipulator has the advantages of accurate positioning of the grab bottle, free flip activity, good sealing performance of the flush valve, and strong flushing force. (5) Incoming and outgoing bottles adopt the guide screw and dial processed by the CNC engraving center to accurately guide the bottles into the inlet rail, effectively solving the problems of squeezing bottles, jamming bottles, blocking bottles, and breaking bottles. (6) Just press the lifting button and replace the corresponding bottle diameter dial, you can replace bottles with different bottle diameters and bottle heights, easy to adjust. 2. Features of the filling machine (1) Large range: It can be used for bottle diameter 60-100mm, bottle height 250-350mm, wide filling capacity range, and easy adjustment. (2) Fully compatible: all kinds of round containers such as glass, porcelain, plastic, and pottery bottles can be fully automated. This machine can be easily connected with the original various bottle feeding lines. (3) Liquid level: The filling liquid level does not change with the bottle capacity, and the filling liquid level is the same. (4) No dripping: The seal is tight and reliable, and the broken, leaking bottle and no bottle will not be filled automatically, and no liquid will be spilled. (5) Non-breaking bottle: adopts elastic bottle holding device, the bottle height error is automatically adapted, soft start, soft brake, no rigid impact, no bottle breakage, and machine damage. (6) Take the lead in introducing foreign filling technology, adopt negative pressure equal position filling valve, good bottle guiding, fast liquid level filling speed, and make the product better than the same industry standard. 3. Features of the stopper (1) The structure design is novel, compact, and reliable. (2) Convenient maintenance, few failures, and long equipment life. (3) Adjust the height of the stopper according to the height of the bottle shape, which is suitable for a wide range of bottle shape heights. (4) Elasticity and overload protection during the bottle feeding and plugging process to prevent the broken bottle from damaging the machine. (5) No bottle, no cork, to prevent the waste of cork. Technical Parameters Model: GFGDP18-12-1 Production capacity: (500ml/b/h) 1000-2000 Number of filling heads: 18 Number of flushing heads: 12 Capping head number: 1 Bottle height: 150-320 (mm) Total power: 2.2 (KW) Dimensions: 2100*1700*3200 Total weight: 2200 (kg)

Automatic Explosion-proof Alcohol Filling Machine

Automatic Explosion-proof Alcohol Filling Machine

GFEPZLQ-6 full-automatic in-line explosion-proof self-flow filling, this machine is a 6-head automatic quantitative explosion-proof liquid linear filling machine. It is suitable for liquid filling machine of glass bottles and plastic bottles of round and various shapes. It can be filled with medical alcohol, gasoline additives and other flammable and explosive non-viscous liquids. The filling principle is to use time to control the filling volume when the liquid pressure is constant. The machine uses plc explosion-proof touch screen control, stable operation and easy maintenance. After replacing a small number of parts and making appropriate corresponding adjustments, glass bottles and plastic bottles of different heights and different diameters can be filled, with high versatility and a wide range of applications. Machine Characteristics For the filling of highly flammable items, the whole machine adopts electrical devices with explosion-proof function, including: explosion-proof motor, explosion-proof solenoid valve, explosion-proof electric cabinet, etc. Rugged, safe and reliable! Parameter Product model name: GFEPZLQ-6 automatic quantitative liquid linear filling machine Production capacity: 600 bottles / hour-1200 bottles / hour Applicable bottle diameter range: Φ65-Φ165 mm or square bottle 65-140 mm Applicable bottle height range: 180-430 mm Host power: 1.5KW Speed regulation form: frequency conversion speed regulation Power supply voltage: three-phase 380v power supply Air source: 0.4-0.8MPa  0.1 cubic meter/minute Host size: 2400mm×1200mm×2400mm Curb weight: 800kg

Automatic artesian filling machine

Automatic artesian filling machine

GFZLQ automatic direct-column self - flow filling machine, this machine is an automatic quantitative liquid filling machine. Suitable for all kinds of non-viscous liquid filling, such as alcohol, glass water, antifreeze, urea, and other liquids. It is suitable for filling liquid in round glass bottles and plastic bottles. The filling principle is to use the time to control the filling amount when the liquid pressure is constant. This machine adopts PLC touchscreen control, stable operation, and convenient maintenance. After a small number of parts are replaced and appropriate adjustments are made, glass and plastic bottles of different heights and diameters can be filled. Features and parameters ♦ Production capacity:600- 000BPH ♦ Suitable for bottle diameter range:Φ65-Φ165mm or square bottles of 65-140mm ♦ Suitable for bottle height range:180-430mm ♦ Motor power:1.4KW ♦ Speed type: Frequency control ♦ Power voltage: Three-phase 380V power supply ♦ Air supply:0.4-0.8MPa 0.1m3/minute ♦ Boundary dimension:2400mm×1200mm×2400mm ♦ Total weight:480Kg

Semi-automatic glass water filling machine

Semi-automatic glass water filling machine

This machine is a semi-automatic filling machine with 4 heads, the bottles are loaded and unloaded artificially. ♦ It used for the liquid like water; glass cleaner water; spirit; liqueur and so on

Chicken Cage

Chicken Cage

1.Full accessories:Feed Trough,PVC Pipe , Drinker,Frame ,Water Tanker ,Pliers ,different connecters and so on . 2. SGScertification. 3.Life Time is 15-20 years. 4.Free high quality parent chicken cage for sale layout design. 5.Installation instructions and video . 6.One -stop shopping. 7.Professional team help you build the scientific farm. 8.24 hours a day online to answer your questions

Broiler Cage

Broiler Cage

. Saving costs for customers because of the lower investment. 2. More suitable for tropical regions such as Africa, Southeast Asia, South Asia, South America, and Middle East countries. 3. Automatic welding and bending system, exact production parameter, and no problem installation. 4. Transverse sliding door and deep feed trough edge control the feed losses effectively. 5. Easy to control parasitic diseases like coccidiosis and worm infestation. 6. Higher feeding efficiency, easier operation, and maintenance compare to the floor system. 7. High egg-laying rate and low mortality rate.

Rabbit Cage

Rabbit Cage

1. Vertical feeding is easy to manage, save space, ventilation and strong performance, and effective prevention of infectious diseases 2. Fractoinal Feeding, females can get a good rest, to improve the productivity of females, females on the effective prevention of infectious diseases 3. Reduced space, Power consumption is greatly reduced to improve growth.

Egg Incubator

Egg Incubator

usage = Chiken, Duck, Quail, Goose Hatching Rate = More than 95% voltage = AC 160V-240V, 50 HZ Power =200-800W Material = Aluminum, Stainless steel Alarm = Over/Less Temperature and Humidity Alarm

Poultry Plucker Machine

Poultry Plucker Machine

Usage = Chicken, Quail, Duck, Goose Depilation net rate =more than 96% Power =180-4000W Material = Stainless steel Voltage = AC 160V-240V , 50HZ

Semi- Automatic Feeding Machine

Semi- Automatic Feeding Machine

The Semi-Automatic Feeding Machine can conveniently solve the problems of feeding small and medium chicken farms. Automatic feeding, Automatic walking, with manual push. Safe,Convenient , Energy Saving, No Noise, Save Feed, Time-Saving It is a good choice for layers and broilers

Animal manure removal system

Animal manure removal system

The motor drives the reducer, then the chain turns the plates, and the plates clear the poultry manure. This automatic manure removal system is designed for the poultry farm

Miller and Mixer

Miller and Mixer

Pellet Mill, Poultry Feed Pellet Machine, Pelletizing Machine manufacturer/supplier in China, offering Small Animal Feed Pellet Mill

Animal Feed Pellet machine

Animal Feed Pellet machine

China Factory Manufacture High-Quality Efficient chicken manure machine a pellet For Sale (rabbits, chickens, ducks, geese, pigeons, birds, pig feed, aquatic fish)

Animal Feed Miller machine

Animal Feed Miller machine

I. In the past, the feed was generally processed into powder and fed, and there were defects such as inconvenient feeding, poor palatability, picky eating of livestock, and low utilization rate. With the advent and popularity of new small pellet feed machinery, it is now convenient to process powdered feed into pellet feed. The utility model has the advantages of simple structure, small occupied area, and low noise, and can be operated by 220 volts single-phase electric power, and is suitable for small-scale farmers who lack three-phase electric conditions. II. There are many advantages to processing into pelleted feed: 1 produces a strong aroma, and the feed texture is hard and easy to eat. 2 reduce adverse effects on digestion, and reduce various parasitic diseases and digestive system diseases. 3 feeding is convenient, and the high utilization rate 4 long service life, reasonable structure, strong and durable.

Exhaust Fan

Exhaust Fan

1. Exhaust Fan Description: It is used to transport non-flammable,low-corrosive gases with a temperature no higher than 500°C, relative humidity no greater than 80% and a quantity of dust and solid impurities 150mg/m³. 2. Exhaust Fan Feature: Low noise, Electricity Saving, Large Air Flow, Easy Installation. 3. Exhaust Fan Application: various warehouses ,offices, flower greenhouse & poultry houses.

Mink Cage

Mink Cage

Material: hot dipped galvanized wire, stainless steel wire MOQ:20 sets Cage Size: 6 / 8/ 12 /16 nests Surface Treatment: Electro-galvanized or Hot dip galvanized Technique: Welded Usage: Protecting Mesh, Cage Packaging Details: Wooden Case Or In Bulk

Automatic Quail Cage

Automatic Quail Cage

Material: Q235 Cold-drawn wire welding Surface: Electric galvanized, hot dipped galvanized, PVC coated Wire diameter: 1.8mm-2.2mm-3.5mm Features: Automated controlled system, Hot galvanized, auti-corrossive, long durability. Size :Lenght: 180 cmTotal widths: 200cmTotal Height: 160cm Packing: 20' container can pack 200 sets. 40' container can pack 400 sets. Scalability: If there are special specifications, also can be customized

Cooling pad system for poultry farming

Cooling pad system for poultry farming

Wet curtain (water curtain) performance characteristics: the use of new materials and space cross-linking technology, high water absorption, high water resistance, mildew resistance, corrosion resistance, and long service life.

Automatic air Knife Dryer

Automatic air Knife Dryer

The machine is used to dry the outside of the bottles when the beverage is filled and the bottle is capped. After capping and inspection, the bottles should be dried with our drying machine. Before sleeve labeling, the bottles should pass the suits of our special wind knives, for which the wind origins from the whirlpool pump. The whirlpool generates pressure wind and becomes a high speed wind curtain through the wind knife mouth, and then the wind blows the bottles up and down till dry. Therefore it is more convenient for the (sleeve) labeling and carton packing. In this way, this machine solves the problem that the bottle body carries water, and confirms that the bottle is dry before labeling.

Automatic multi-mouth dryer

Automatic multi-mouth dryer

This machine USES several blow outlets, with hot air to the bottle for a full range of three-dimensional drying, to ensure that the bottle drying quickly, convenient for the next operation. This machine can be connected to the labeling machine before use, convenient for subsequent labeling of the bottle. It worked like magic.

Automatic double label labeling machine

Automatic double label labeling machine

Automatic double label labeling machine, suitable for medicine, food, daily chemical and other light industry round, square, flat bottle, and other bottle types (can be customized). Label the front and rear sides of the bottle. For example Round bottles, Square bottles, Flat bottles, Curved bottles, Metal bottles, Cans, Paper/Plastic bags, Paper/plastic boxes, etc. Suitable for all kinds of red wine bottles, wine bottles, whiskey bottles, and other round and square bottles.

Automatic single-label labeling machine

Automatic single-label labeling machine

Automatic Labeling machine with High accuracy and high speed, which is widely used in pharmaceutical, beverage, food, cosmetic, medicine, daily chemical, cultural goods, and other industries. It's suitable for various kinds of bottle types and other products. For example Round bottles, Square bottles, Flat bottles, Curved bottles, Metal bottles, Cans, Paper/Plastic bags, Paper/plastic boxes, etc.

Semi-automatic round bottle labeling machine

Semi-automatic round bottle labeling machine

Application range GFTB-1B semi-automatic round labeling machine is an ideal equipment for semi-white dynamic labeling of round bottle products in daily chemical, food and beverage, pharmaceutical, chemical, and other light industry industries. This machine is suitable for round bottles of various sizes, suitable for small batches and multi-variety production. This machine can only be used for single-machine labeling. For other uses, please consult Guangjia for any damage caused by improper use. The manufacturer Heng is not responsible for guaranteeing such risks. The use of monologues is strictly punished. The strict instructions for the use of the sea are part of the requirements for the use of this machine. Performance characteristics The machine has a reasonable structure, reliable performance, simple operation, adopts photoelectric detection, and the standard is correct. 1. Adopt advanced labeling mechanisms to ensure labeling accuracy. 2. Able to label a variety of bottles with strong adaptability. 3. The sensitivity of the label light eye is adjustable. It can be used for identification and comparison of the base paper of labels with different light transmittances and the sensitivity can be adjusted. The labels with different lengths can be optimally adjusted to ensure that the labeling is normal and the labeling is smooth and accurate. 4. All the institutions, including the frame, the standard feeder, and the stop rod to the fasteners, are mostly made of stainless steel and aluminum profiles, which will never rust and have no pollution interference, ensuring GMP environmental requirements. 5. All system control components have international standardization certification and have passed strict factory inspection tests to ensure the reliability of various functions.

Automatic aluminum cap sealing machine

Automatic aluminum cap sealing machine

Products Description This machine is suitable for automatic screw cap glass bottles, and plastic bottles, widely used in medicine, food, chemical industry, etc. Features 1. PLC control system, color touch screen display. 2. This machine adopts a constant torque screw cap, equipped with the automatic sliding device, to prevent cap damage. 3. Machine has no bottle no capping, no cap automatic stopping as a protection device. 4. Machine body and product touching part are made of stainless steel, which completely meets GMP requirements.

Automatic Beer Cap Sealing Machine

Automatic Beer Cap Sealing Machine

Automatic Beer Cap Sealing Machine Share Honor Product Description The product description GFBCQ series capping machine is suitable for the automatic capping of beer. Product Features 1. Equipped with turntable lid-off system, automatic lid-off, no need for manual lid-off, and uniform lid-off, saving labor. 2. The height of the grasping manipulator can be adjusted, and the dial system can be replaced to fit different heights and diameters of the bottle. 3 grasp the manipulator equipped with a torque overload system, torque size can be adjusted randomly, to prevent the pressure is too big or too small, the pressure is stable and beautiful! 4. Install the travel switch and clutch for the dial drive gear to prevent the hard force damage to the bottle and the dial when the dial is stuck.

Automatic can lid sealing machine

Automatic can lid sealing machine

Features The automatic single-head linear capping machine is a simple automatic capping machine (manual capping) developed by our company. It is suitable for the automatic capping of various bottle caps. It is economical and can be used alone or with a conveyor line. The volume is small It is easy to install, easy to operate, and has a wide range of uses. The casing is made of stainless steel, beautiful and hygienic. It is economical and practical. It has a simple structure and is easy to operate. It is an ideal production equipment for small and medium-sized factories. Main Structure And Performance 1. Transmission system: capping device, speed regulating motor, main shaft, indexing plate, rotary head, electrical components, etc. 2. Covering system: There are two kinds of metal cover and plastic cover. (1) The metal cover is composed of a thread cutter pressure spring and gland head. (2) The plastic cover is composed of a crimping die and a capping head. Technical Parameters Capping head number: single head Production capacity: 2000-2600 bottles/hour (speed can be changed according to user requirements). Applicable bottle caps: plastic caps, metal caps Applicable bottle height: 260-350mm Bottle diameter: 100-250mm Motor power: 1KW Dimensions 1000*1000*1800mm

Electromagnetic aluminum foil sealing machine

Electromagnetic aluminum foil sealing machine

Introduction It is widely used in pharmaceuticals, food, grain and oil, chemical, pesticide, cosmetics, detergents, lubricants, and other industries to seal plastic containers. The electromagnetic induction aluminum foil sealing method has good effects of being moisture proof, leak proof, mildew proof, anti-theft, anti-counterfeit, anti-oxidation, etc., to ensure product quality, facilitate product transportation, and extend product shelf life. Features 1. Unique appearance design, all-metal shell, shielding high-frequency electromagnetic radiation when the host works; 2. The machine works continuously, and it is embedded into the conveyor line, production line, and filling line, which can be adapted to the continuous production of the assembly line. It can also be equipped with a separate conveyor to be used as an independent aluminum foil sealing machine; 3. Non-contact heating is adopted; the automatic sealing of the bottle by the conveyor belt; 4. The frequency can be adjusted, with its detection function, its overload protection, and water shortage alarm protection function. Parameter Dimensions: 500*550*1250mm Motherboard power: 4kw Applicable bottle cap: 10-180mm

Fully automatic game machine

Fully automatic game machine

This product is a new type of sealing equipment that has been continuously improved by the technical personnel of our unit on the basis of many years of use by the majority of users. This product completely eliminates the phenomenon of damage and bottle breakage. It is the most ideal sealing equipment for wine and beverages. Customers are welcome to choose. Performance Characteristics 1. Simple operation, convenient maintenance and reliable quality. 2. The body is equipped with a buffer device, which does not damage the bottle and stopper. 3. It has the characteristics of low power, high efficiency and energy saving. Technical Parameters Production capacity: 3000 bottles/hour Applicable bottle type: φ=60-100mm h=250-380mm Machine power: 1.5kw Bottle mouth diameter: 18-25mm Machine weight: 800 kg Machine size: 1000*1000*2200

Automatic rubber cap heat shrink machine

Automatic rubber cap heat shrink machine

Product Description ◆ This machine is mainly suitable for the bottle type which needs the heat shrinkable rubber cap of the bottle mouth after the liquid filling and sealing. (1) The structure and working principle of the whole machine are simple, the work is reliable and stable, and the maintenance is convenient. (2) This machine adopts a uniform adjustable blowing type heat shrink head, circular heating, and uniform shrinkage, the surface of the rubber cap is firm and smooth, beautiful, and wrinkle-free. (3) Adjustable temperature type electric heating tube, microcomputer control, synchronous temperature adjustment. (4) When the machine is stopped or powered off halfway through the work, the cylinder quickly lifts the heat-shrinkable head to prevent the rubber cap from being burned or catching fire. (5) Both the power system and the dial system are equipped with buffer overload protection devices and the elastic components are used for absorption at the start, which is stable and soft. When an accident occurs, the overload device immediately cuts off the power supply and the equipment automatically shuts down, effectively ensuring the safety of man and machine. ◆ This machine is mainly suitable for corking corks of glass bottles such as wine. It is mainly connected to the back of the filling machine and is used for plugging after filling. ◆ The shrinkage plug mechanism of this machine adopts an independent extrusion head, the shrinkage block adopts special material and is quenched to ensure the hardness, no slag when plugging, and long service life. And no bottle will not stop. The middle pillar is adjustable, which can meet the requirements of different bottle heights. Adopt continuous running type bottle-in and bottle-out device, there is a clutch protection device at the bottle-in and out dial dial, when the bottle is stuck, it will automatically stop to ensure production safety.

Tunnel type rubber cap heat shrink machine

Tunnel type rubber cap heat shrink machine

This machine is used in conjunction with the USL-type bottle transfer machine of the filling production line. The machine can change the temperature in the heating and shrinking chamber by setting different temperatures of the electronic temperature indicating regulator according to the different material and thickness of the rubber cap. In order to achieve the best shrinkage effect. The machine has the characteristics of small size, simple structure, novel and beautiful appearance, convenient operation, and maintenance. Mainly aimed at the rubber cap on the top edge of the bottle, and the rubber cap has no vent hole. Working Principle The machine heats the shrinkage chamber through an electric heating tube and then sends air through a blower to make the temperature of the heat shrinkage chamber uniform. When the bottle with a rubber cap passes through the heat shrinkage chamber, the rubber cap shrinks and wraps the bottle mouth to achieve good shrinkage. purpose.

Chain track rubber cap heat shrink machine

Chain track rubber cap heat shrink machine

This machine is used in conjunction with the USL type bottle transfer machine of the filling production line. The machine can change the temperature in the heating and shrinking chamber by setting different temperatures of the electronic temperature indicating regulator according to the different material and thickness of the rubber cap. In order to achieve the best shrinkage effect. The machine has the characteristics of small size, simple structure, novel and beautiful appearance, convenient operation and maintenance. It is mainly aimed at the rubber cap on the top of the bottle, and the rubber cap has no vent hole. Working Principle The machine heats the shrinkage chamber through an electric heating tube and then sends air through a blower to make the temperature of the heat shrinkage chamber uniform. When the bottle with a rubber cap passes through the heat shrinkage chamber, the rubber cap shrinks and wraps the bottle mouth to achieve good shrinkage. purpose.

Automatic can sealing machine

Automatic can sealing machine

Technical parameters Material: 304 stainless steel Qty of sealing:1 Sealing speed:30~50pcs/min. Height of sealing:50-70;70-220mm, adjustable Control model: PLC and touchscreen Applicable bottle type:35-130mm (only applicable to single diameter) Voltage:380V 60Hz Electricity power:1.3KW Weight:500KG Size:3000(L)* 900(W)* 1800 (H)mm Structure and properties description 1. The design of the operation panel is reasonable and simple, which faciliates adjustment and maintenance. 2. The machine is controlled by the PLC system and touch screen. 3 . It has a high production capacity and degree of automation which may save labor costs. It is applicable as equipment for sealing and filling production lines. 4. Sealed reel adopts two reel sealing. The sealed reel is perpetually rust-proofing. It has extremely good sealing performance. 5. The can is designed to not rotate during the sealing process. It requires high processing precision. Its sealing quality is superior to that of similar products in China. 6. Applicable for sealing various tin cans, aluminum cans, paper cans, and all kinds of round cans, simple to operate, and it is an ideal equipment for food, beverage, pharmaceutical, and other industries.

Semi-automatic barrel capping machine

Semi-automatic barrel capping machine

GFDTYT pneumatic capping machine is a simple automatic capping machine developed by our company for customers. It is suitable for the automatic capping of many different sizes of barrels. It is economical and can be used alone or with a conveyor line. It is small in size and easy to install. , Has many uses. The casing is made of stainless steel, beautiful and hygienic. GFDTYT series capping machine is economical and practical. It has a simple structure and is easy to operate. It is an ideal production equipment for small and medium-sized factories. Device Parameters Capping speed: 200-800 barrels/hour Working voltage: 380v Working pressure: 0.4-1.0 MPa (provided by the buyer) Power: 0.75kw (excluding air compressor) Air consumption: <0.4 cubic meters/minute Installation And Commissioning 1. First, carefully check whether the air circuit and the connecting line are loose or fall off. Whether the equipment is damaged during a collision or other screws are loose and fall off. 2. Connect the gas circuit, if supporting filling equipment, the circuit and gas circuit are generally installed on the filling equipment. Just connect the photoelectric switch and the gas path. 3. After connecting the power supply and gas circuit, adjust the height of the indenter according to your needs, so that the bottle is exactly in the middle of the indenter when capping. 4. Adjust the distance between the indenter and the barrel, put the barrel on the platform, adjust the indenter to a distance of 1-2mm from the upper mouth of the barrel, put the cap on the bottle, and experiment with it to see if the cap is suitable. Adjust slightly. The indenter can adjust the punching distance of the indenter according to the tightness of the cover.

Semi-Automatic Can Cover Sealing Machine

Semi-Automatic Can Cover Sealing Machine

The company produces the GFYT semi-automatic capping machine, is according to foreign advanced technology, the synthesis of country conditions and the design, it has the design advanced, the structure is reasonable, the appearance is beautiful, the debugging is convenient and so on the merit. Achieve a certain degree of automation at, a moderate price. It is widely used for sealing all kinds of cans and bottles. Main technical parameters Product model:gfyt-1 Number of sealing heads: single head Production capacity:1200 bottles/hour Applicable cap: tinplate cap Applicable bottle height:160-300mm Motor power:0.37KW Appearance size:630*240*940mm

Semi-automatic aluminum cap sealing machine

Semi-automatic aluminum cap sealing machine

This machine is an automatic sealing machine with a single capping head, the bottles are loaded and unloaded automatically. It uses four wheels balance principle to generate a uniform force on the wheels to achieve good sealing quality.

Semi-automatic beer cap sealing machine

Semi-automatic beer cap sealing machine

This machine is a semi-automatic sealing machine with a single capping head, the bottles are loaded and unloaded manually. The semi-automatic glass beer ring pull-off capping machine is mainly applied to beer, fruit juice drinks, beer, cosmetics, food and beverage, and other industries, excellent quality, and cheaper prices.

Semi-automatic plastic cap sealing machine

Semi-automatic plastic cap sealing machine

These plastic bottle capping machines are mainly used for capping testing or low-volume production. Semi-automatic plastic bottle capper machine is a lightweight flexible, strong mobile operation and greatly reduces business costs.

Semi-Automatic tin Can Sealing Machine

Semi-Automatic tin Can Sealing Machine

Semi-Automatic tin Can Sealing Machine Share Honor Product Description This kind of copper is used for tin can capping, which includes tin can bottle & PET tin can caps & beer tin cans, and so on. When purchasing this machine, the user should provide the tank body and tank cover to be sealed, so that the manufacturer can prepare the accessories suitable for the user to seal the tank for you. 1. Even the smallest part of this machine is quality ensured. 2. Adaptable to all kinds of shapes of bottles, easy to set up. 3. No liquid leakage, strongly sealed. 4. No damage to the bottle itself, no restriction on height or width. 5. Concise and well-designed machine structure, easy to maintain.

Semi-automatic vacuum sealing machine

Semi-automatic vacuum sealing machine

This glass bottle vacuum capping machine is widely used in industries, such as the food industry: soy sauce, vinegar, juice beverage, sesame paste, chili sauce, peanut butter, canned honey peach, canned carambola, etc. The semi-automatic vacuum capping machine breaks the traditional way of using electrical combination and is changed into the pure mechanical transmission, which is easier to operate and more convenient to use. This machine has the function of vacuum pumping. The product after the sealing of the screw cap can effectively extend the warranty period in a normal environment, and it is not easy for the product to be oxidized and deteriorated with the outside air. The vacuum capping machine is generally referred to as the equipment for the vacuum capping of glass bottle tinplate. The top of the glass bottle has a screw, and the cover is usually made of tinplate. It has the same number of buttons as the corresponding number of screw threads. According to different bottle mouth diameter standards, it has three, four, and six screw caps. ♦ Voltage:380v/220v+10% ♦ Power: 400w or less ♦ Applicable bottle type: φ=40-90mm H=50-180mm ♦ Host power:0.55KW

Semi-automatic vacuum sealing machine

Semi-automatic vacuum sealing machine

This glass bottle vacuum capping machine is widely used in industries, such as the food industry: soy sauce, vinegar, juice beverage, sesame paste, chili sauce, peanut butter, canned honey peach, canned carambola, etc. The semi-automatic vacuum capping machine breaks the traditional way of using electrical combination and is changed into the pure mechanical transmission, which is easier to operate and more convenient to use. This machine has the function of vacuum pumping. The product after the sealing of the screw cap can effectively extend the warranty period in a normal environment, and it is not easy for the product to be oxidized and deteriorated with the outside air. The vacuum capping machine is generally referred to as the equipment for the vacuum capping of glass bottle tinplate. The top of the glass bottle has a screw, and the cover is usually made of tinplate. It has the same number of buttons as the corresponding number of screw threads. According to different bottle mouth diameter standards, it has three, four, and six screw caps. ♦ Voltage:380v/220v+10% ♦ Power: 400w or less ♦ Applicable bottle type: φ=40-90mm H=50-180mm ♦ Host power:0.55KW

Automatic reverse bottle washer

Automatic reverse bottle washer

This machine is mainly used for washing glass bottles and polyester bottles. It is suitable for fully automatic washing of wine, beverages, and brewing before filling. The output is 3500-12000 bottles per hour, which can be selected by users. The whole machine adopts a circumferential turning bottle structure for washing, with electrical control components and an automatic turning bottle clip, it has the function of automatic clamping and positioning the bottle mouth for washing, the whole machine is beautiful and durable. Main features 1. This machine adopts a flexible strong manipulator to grasp, turn over, punch, control, flip and reset, and other processes to achieve full automatic production. 2. High efficiency and stable and reliable flushing effect of clamping and turning pressure valve.No bottle without washing, save water. 3. Delta inverter is adopted to adjust the speed by frequency conversion, and the bottle speed can be freely controlled, and the current production speed can be displayed digitally. 4. The introduced foreign advanced technology research and development of the flip manipulator with grasp bottle positioning accurate, flip freely; The flush valve USES the middle plunger guide shaft lip seal ring, the sealing performance is good, the service life is long, the strength of the bottle to the neutral bottle is accurate and so on.

Semi-automatic chain-track 54-head bottle washing machine

Semi-automatic chain-track 54-head bottle washing machine

Single row, tracking internal and external shower, one internal shower, one external shower. Technical parameters Model: CK-54 Production capacity:4000 vials/h Machine power:0.55kw Dimensions:3200×700×1150

Fully automatic sealing and tapping machine

Fully automatic sealing and tapping machine

Technical Parameters Power supply voltage: AC220v 50HZ/AC380V 50HZ Sealing speed: 22m/min Transmission mode: left and right conveyor belt transmission Maximum sealing size: 500mmX500mm Table height: 570mm-800mm Mechanical dimensions: 1850mmX855mm (1100mm*1750mm) Tape size: 45mm-75mm Drive motor: special increase reducer 2 220V/380V optional Overview And Application Areas The machine is an automatic sealing machine that uses tape sealing tapes such as PLC and BOPP as sealing materials. It is used for the top and bottom sealing of cartons and other packaging boxes with basic specifications of shape and shape. It has a wide range of applications, suitable for the chemical fiber industry, tobacco re-baking enterprises, pharmaceutical industry, the publishing industry, refrigeration and air conditioning industry, home appliance industry, ceramic industry, etc... Parameter Dimensions: 1400mmx620mmx1435mm Packing size: 1500mmx700mmx1600mm Table height: 750mm Load-bearing capacity: 80KG Net weight: 150KG Bandwidth: 9mm-15mm Bundling speed: 2.5 seconds/track Tape reel: inner diameter of the paper core with ring 200mm-210mm; outer diameter of tape ring 400mm-450mm; width of tape ring 170mm-190mm Bundling specifications: the lowest packaging size: 80mmx60mm is the largest within the frame Bonding method: bottom bonding, bonding surface 90%, bonding position deviation is less than 2mm Bundling tightness: 0-50KG Power: 400W, 3A Power supply: 1p, 220V, 50-60Hz (standard refer to machine nameplate) Working noise: less than 75dB (A) Adjustable options: frame size, bandwidth Standard frame 800mmx600mm (can be customized if there are special requirements)

Semi-automatic tape sealing machine

Semi-automatic tape sealing machine

Introduction The carton sealing machine is mainly suitable for carton packaging, which can be used for stand-alone operation, and can also be used in conjunction with assembly lines. It is widely used in household appliances, textiles, food, department stores, medicine, chemical industry, and other industries. Automatic sealing machine with tape as sealing material. It is used to seal the carton after setting or packing the gift box. The machine consists of the following parts: 1) Tape bracket parts: used for tape installation and tension adjustment. 2) Lifting handwheel components: used to increase or decrease the upper conveying components. 3) Reducer parts: the speed required to achieve box sealing. 4) Roll sealing and cutting parts: close the mouth of the carton, seal the box, and cut the tape. 5) Sliding body parts: the height can be adjusted according to the height of the carton. 6) Linkage parts: used to adjust the horizontal height of the workbench. 7) Upper guide wheel: make the upper box close tightly. 8) Upper conveying parts: Carton conveying is completed by a high gripping flat belt. 9) Guide rod parts: Can be adjusted to be wider or narrower according to the width of the carton. 10) Side frame components: easy to place long cartons. 11) Electrical switch: start or stop the motor.

Automatic bottle unscrambler

Automatic bottle unscrambler

The Main Purpose ◆ It is mainly used for the automatic sorting and transfer of plastic round bottles, square bottles, or glass bottles. It can be connected to the conveyor belt of the filling machine and capping machine to automatically send bottles to improve efficiency; it can also be used at the intermediate connection of the assembly line as a buffer Platform to shorten the length of the conveyor belt. ◆ The applicable bottle range can be adjusted freely, the bottle conveying speed is 30~200 bottles/min, and the speed is adjustable, which is convenient for production arrangement. Technical Parameters Turntable diameter: 600mm-1200mm (customized according to bottle size) Dimensions: 1200x9001300mm Voltage: 220V/50H z Motor power: 0.12kw Weight: about 65KG Applicable product range: diameter: φ20mm~φ100mm height: 20mm~150mm

Automatic lifting machine

Automatic lifting machine

Manually pour messy bottles or inner plugs or outer caps or other materials into the bottle storage box → lift → materials into the next process. Technical Parameters Applicable materials: bottles, inner plugs, outer caps, etc. Speed: Adjustable to meet the needs of the next process equipment. Use the capping and capping machine. The lifting type capping machine is a special device for automatic capping and capping. It is mainly used in the supporting equipment of the filling line. The main function is to cap the cap And put the cover. Size: 800*1000*3000mm Machine weight: 150kg Power: 0.37kw (adjustable speed) Material: stainless steel Component The capping machine is generally composed of two parts, an automatic capping part, and a capping part. It includes a bottle cap lifting conveyor belt and a silo. The lifting conveyor belt is provided with a transverse blocking bar carrying the bottle cap. The lifting conveyor belt has the following cooperation relationship between the inclination angle of a partial section and the blocking bar: The center of gravity of the reverse cover of the section is located outside the bar, and the center of gravity of the positive coverage of the section is located inside the bar. The present invention utilizes the feature that the center of gravity of the bottle cap does not coincide with its geometric center, so that under the effect of its gravity, the reverse cap falls out of the stop bar in the above section of the lifting conveyor belt, freely falls back to the silo, and completes the capping. Therefore, It has little effect on the bottle cap, the bottle cap is not easy to be damaged during capping, and multiple caps can be sorted at the same time, which can improve the capping efficiency multiple times. Principle First of all, the uncovering part uses the imbalance of the weight of the cap to lift the qualified cap. The unqualified cap is dropped and then lifted until the lifting condition is met, so the uncap part directly pours the bottle cap to be straightened into the capping slot. It can be, the equipment directly lifts the qualified lid into the conveyor belt through the lid conveyor belt, and the capping device directly hangs the smoothed lid on the top of the bottle that moves with the conveyor belt, and then uses the positioning device to position the lid to complete the finishing In the process of covering and falling, all the processes of covering and falling do not require manual intervention. Features The capping system mainly adopts a straight-line belt conveying device to achieve the purpose of capping; the support system supports the vertical capping system, and can adjust the inclination of the belt of the capping system to adapt to different heights of caps The capping needs; the capping system allows the cap to fall accurately on the bottle mouth through the curved guide rail, to achieve the * combination with the fully automatic crawler capping machine. This equipment has the characteristics of a simple and reasonable structure, a good degree of automation, replenishment and capping without climbing, and easy operation.

Semi-automatic film packer

Semi-automatic film packer

Overview The automatic shrink film sealing and shrinking packaging machine is a new type of packaging machine developed by our company based on the advantages of similar models at home and abroad. It is widely used in combination packaging of beverages, food, medicine, and chemical products. No bottom bracket or carton is needed, no matter the square, round, or flat shape, it can be perfectly packaged, with good intuitive effect and low packaging cost. This machine adopts a novel optimized design, PLC automatic control, man-machine interface tracking, and accurate positioning. The secondary package enters the state, eliminating bottle shortage and bottle pouring, flexible adjustment, safe and beautiful. Adjustable hot air circulation structure, suitable for all kinds of existing heat shrinkable films (including color printing), fast and easy film replacement, fault warning, complete locking, reliable operation. Therefore, it provides a solid guarantee for constant quality, stability and reliable, and continuous production for a long time.    The whole machine is made of high-quality steel and stainless steel. The structure is compact and reasonable, durable, and has a significant energy-saving effect. The new shrink film automatic packaging machine with independent intellectual property rights is the first choice of supporting equipment for beverage canning production lines. Equipment Composition And Working Principle 1. The equipment consists of the following parts   A. Bottle transfer mechanism: convey the items to be packaged.    B. Bottle splitting and bottle blocking mechanism: Separate conveying and control of package travel.    C. Separation bottle mechanism: Separate packaging bottles and sub-package waiting for bottles.    D. Bottle pushing and bottle guiding mechanism: push items to the sealing and cutting station.    E. Bottle pressing mechanism: prevent bottle falling and ensure the sealing and cutting are completed.    F. Film fixed-length conveying mechanism: conveying the position of the packaging film, and at the same time pushing the packaging bottle that was previously completed with the film sleeve on the conveyor belt in the heat shrinking device, at this time the film feeding mechanism also works at the same time. Then the film-pressing cylinder moves downward to hold down the film, and then the heat sealing cutter moves upward to complete the sealing and cutting function. The packaging bottles pushed onto the high-temperature conveyor belt complete the heat shrinking function while moving forward in the heat-shrinking equipment, and finally reach the finished product bearing device after being cooled and contracted by cold air. The above process is repeated continuously to achieve packaging automation.    Except for the conveying mechanism, the actions of the above process are all completed by the PLC program controlled by the cylinder under the action of compressed air. Features Feature 1: The temperature of the drying box is 0-300°, which not only dries the bottle body, but also kills bacteria that are not resistant to high temperatures, and cleans the bottle to a certain extent. Feature two: The machine uses a high-temperature resistant nylon mesh belt, which has the characteristics of stable operation and uniform shrinkage. Feature three: Automatic control after the machine temperature rises to a predetermined temperature to reduce power consumption; the machine is a step-less speed regulation, which greatly improves production efficiency.

Bath Toilet Small Bar Soap Making Machine

Bath Toilet Small Bar Soap Making Machine

Solid Soap Production Line

Solid Soap Production Line

Laundry And Toilet Soap Making Machine

Full Automatic Pizza Flow Packing Machine Bread Vegetable Packing Machine

Full Automatic Pizza Flow Packing Machine Bread Vegetable Packing Machine

Type: Multi-Function Packaging Machine Production Capacity: 20bag/min, 40bag/min, 25bag/min, 50bag/min, 150bag/min Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works, Energy & Mining, Food & Beverage Shops, Advertising Company Weight (KG): 500 Condition: New Function: FILLING, Wrapping, Labeling, Laminating, Capping, COATING, Sealing, BOXING, Embossing, Gluing, counting, Sand ealing Automatically Application: Food, Beverage, Commodity, Medical, Chemical, Machinery & Hardware, Textiles, Cigarettes, medical face mask automatic packing machine Packaging Type: Cartons, CANS, StandPouchesouch, Bags, Film, Foil, Pouch, case, Sachet/Pillow bag/Back bag Packaging Material: Plastic, Paper Automatic Grade: Automatic

Horizontal Candybiscuit Flow Wrapper Machine/Face Mask Filling Machine Mask Automatic Packing Line

Horizontal Candybiscuit Flow Wrapper Machine/Face Mask Filling Machine Mask Automatic Packing Line

Type: Multi-Function Packaging Machine Production Capacity: 20bag/min, 40bag/min, 25bag/min, 50bag/min, 150bag/min Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company Weight (KG): 500 Condition: New Function: FILLING, Wrapping, Labeling, Laminating, Capping, COATING, Sealing, BOXING, Embossing, Gluing, counting, Sealing Automatically Application: Food, Beverage, Commodity, Medical, Chemical, Machinery & Hardware, Textiles, Cigarettes, medical face mask automatic packing machine Packaging Type: Cartons, CANS, Stand-up Pouch, Bags, Film, Foil, Pouch, case, Sachet/Pillow bag/Back bag Packaging Material: Plastic, Paper Automatic Grade: Automatic

Washing Detergent Soap Body Gel Hair Conditioner Mixing Machine Liquid Soap Mixing Tank

Washing Detergent Soap Body Gel Hair Conditioner Mixing Machine Liquid Soap Mixing Tank

Mixer Type: Homogenizer Barrel Volume (L): 50 L-2000 L Material Processed: Chemicals, Food, Medicine Max. Loading Volume (L): 2000 L Range of Spindle Speed(r.p.m): 1 - 65 r.p.m Max. Loading Capacity: 2000 L Weight (KG): 350 KG Material: SUS304, SUS304L, SUS316, SUS316L, SUS304 Condition: New Application: Liquid, Liquid Blending

Mobile Single Automatic Cow Milking Machine

Mobile Single Automatic Cow Milking Machine

Applicable Industries: Hotels, Garment Shops, Building Material Shops, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops Showroom Location: Peru, Indonesia, Thailand, Uzbekistan Video outgoing-inspection: Provided Machinery Test Report: Provided Marketing Type: New Product 2020 Warranty of core components: 1 Year Core Components: PLC, Engine, Bearing, Pressure vessel, Gear Condition: New

High Yield Detergent Powder Filling Packing Machine

High Yield Detergent Powder Filling Packing Machine

Mixer Type: Screw Barrel Volume (L): 500 Material Processed: Plastics, Chemicals, Food, Medicine Max. Loading Volume (L): 500 L Range of Spindle Speed(r.p.m): 20 - 50 r.p.m Weight (KG): 300 KG Material: SUS304L, SUS304 Condition: New Product Type: Detergent Powder

latest Liquid soap mixer machine to make shampoo liquid detergent agitator Mixer

latest Liquid soap mixer machine to make shampoo liquid detergent agitator Mixer

Mixer Type: Homogenizer Barrel Volume (L): 50 L-2000 L Material Processed: Plastics, Chemicals, Food, Medicine Max. Loading Volume (L): 2000 L Range of Spindle Speed(r.p.m): 1 - 65 r.p.m Max. Loading Capacity: 2000 L Weight (KG): 350 KG Material: SUS304, SUS304L, SUS316, SUS316L, SUS304 Condition: New Application: Liquid, Liquid Blending

100kg/hour Small Mini Laundry Bar Soap Making Machine

100kg/hour Small Mini Laundry Bar Soap Making Machine

Place of Origin: Henan, China Brand Name: Nora Condition: New Product Type: Soap Weight (KG): 1000 Machine Type: Soap making machine

used howo tractor truck head

used howo tractor truck head

YEAR: 2015-2020 MILEAGE: 30000-35000KM ENGINE: 336HP, 371HP,375HP,420HP BRAND: HOWO Chassis Model = SINOTRUK HOWO ZZ4257S3241W Engine = WD615.49 371hp/ 266hp/ 290hp/ 336hp/ 420hp Drive Model = 6X4 Fuel Type/Emission = Diesel, Euro II Transmission = HW15710/HW19710, 10 forward & 2 rear Steering = ZF hydraulic steering with power assistance

14 meter, 15 meter Semi Trailer 3 Axles 60 ton

14 meter, 15 meter Semi Trailer 3 Axles 60 ton

Low Bed Semi Trailer Brand New Payload: 60 ton Size: 14 x 3 x 1.05 m(1.5) Axle: 3 axles Tyre: 275/70R22.5 tubeless 12pcs Ladder: Spring Type on both sides Suspension: Spring type

Used 30tons shacman 6x4 dump truck

Used 30tons shacman 6x4 dump truck

Year: 2015-2020 Engine: 371hp,375hp,380hp,400hp Bucket: 20-25cbm Tire: 12R22.5,31580R22.5 Max. speed (km/h) = 80 - 75KM Wheelbase (mm) =3800 Engine = WP6.240E32 Euro Ⅱ、WP10.300E22 EuroⅡ Rated power = 240hp, 300hp Gearbox = 8JS118+QH50, 10JSD180+QH50

Used HOWO 8X4 dump truck 371HP

Used HOWO 8X4 dump truck 371HP

Year: 2015-2021 Engine: 336hp,371hp,400hp,430hp Bucket: 20, 25cbm Tire: 12R22.5, 315 80R22.5 tubeless tire Chassis Model = SINOTRUK HOWO ZZ3317N3847 Engine = 371hp, 375hp Drive Model = 8x4 Fuel Type/Emission = Diesel , Euro II Transmission = HW19710/HW19712,10 /12 forward & 2 rear Steering = ZF hydraulic steering with power assistance

Used HOWO A7 Tractor Truck low roof

Used HOWO A7 Tractor Truck low roof

YEAR: 2015-2020 MILEAGE: 30000-35000KM ENGINE: 336HP, 371HP,375HP,420HP BRAND = HOWO Chassis Model = SINOTRUK HOWO A7 ZZ4257N3247N1B Engine = WD615.49 371hp/ 336hp/ 380hp/ 420hp Drive Model = 4X2 Fuel Type/Emission = Diesel, Euro II Transmission = HW 19710, 10 forward & 2 rear

Volvo Excavator EC210BLC

Volvo Excavator EC210BLC

weight: 20tons year: 2010 working hours: 6000h

used howo water tank trucks

used howo water tank trucks

SDLG LG956L 956L

SDLG LG956L 956L

Doosan Excavator DH225LC-7

Doosan Excavator DH225LC-7

Used shantui bulldozer

Used shantui bulldozer

used XCMG wheel loader

used XCMG wheel loader

Year: 2010-2022 Loading capacity = 3tons 4tons, 5tons,6tons,7tons Overall dimensions = Overall length (bucket on the ground) 8165 mm Overall width = 2850 mm Bucket width = 3016 mm Overall height = 3485 mm Wheelbase = 3300 mm Tread = 2250 mm Min. ground clearance = 450 mm

used XCMG wheel loader

used XCMG wheel loader

Overall length (bucket on the ground) = 8165 mm Overall width = 2850 mm Bucket width = 3016 mm Overall height = 3485 mm Wheelbase = 3300 mm Tread = 2250 mm Min. ground clearance = 450 mm Rated capacity = 5000 kg Bucket volume = 2.5 m3 (Bucket for rock) 3 m3 (Standard bucket) 3.5 m3 (Bucket for light material) 4 m3 (Bucket for light material)

Used HOWO Concrete Truck Mixer Transit Truck

Used HOWO Concrete Truck Mixer Transit Truck

Year = 2019 Mileage = 28000km Tank = 9 CBM Engine = 336hp Brand = HOWO

Used Shacman Concrete Mixer Truck

Used Shacman Concrete Mixer Truck

Model : SX5255GJBJR384, SX5258GJBJT384C Max. speed(km/h) : 85, 70 Wheelbase(mm) : 3775+1400 Engine : WP10.340E22+PTO Euro II, ISM11E5 385+PTO Euro Ⅴ Rated Power: 340hp, 380hp

Used Howo Engine 371 , 375hp

Used Howo Engine 371 , 375hp

Used Toyota Forklift

Used Toyota Forklift

Brand: TOYOTA Year: 2010-2022 Power: Diesel, Gas, Electric Loading capacity: 2tons, 3tons, 5tons, 7tons, 10tons

Used Howo Low Bed Semi Trailer

Used Howo Low Bed Semi Trailer

Overall Dimension = 12500l * 2500w * 1575h. Weight = 7400 kg. Axle = 3pcs FUWA Brand, 13 Ton loading capacity Tyre = 12pcs 11.00R20-16R(Chengshan Brand) Rim = 12pcs 8.0-20 Leaf spring = 6 sets, 10pcs *90mm width *13mm thickness Braking system = set the whole vehicle, 2 line air , braking system with air tank , emergency relay valve, braking chambers and mechanical slack

Used shacman 8x4 dump truck

Used shacman 8x4 dump truck

Year: 2015-2020 Engine: 371hp,375hp,380hp,400hp Bucket: 20-25cbm Tire: 12R22.5, 31580R22.5 Max. speed (km/h) = 80, 75KM Wheelbase (mm) = 3800 Engine = WP6.240E32 Euro Ⅱ, WP10.300E22 EuroⅡ Rated power = 240hp, 300hp, 371hp,380hp,400hp Gearbox = 8JS118+QH50, 10JSD180+QH50.

used dump trailer

used dump trailer

3 axles dump trailer 60tons Year: 2020 Length: 9mm Lifting system: HYVA Tire: 12R22.5

Walking Tractor

Walking Tractor

The tractor loader is your versatile loader solution for a wide range of jobs. As it is two pieces of construction equipment combined into one unit, a backhoe loader contains: a tractor, a loader.Each piece of equipment for a particular type of work.

Wheeled Tractor 220HP

Wheeled Tractor 220HP

Wheeled Tractor 180HP

Wheeled Tractor 180HP

Wheeled Tractor 150HP

Wheeled Tractor 150HP

Wheeled Tractor 90HP

Wheeled Tractor 90HP

Corn Seeding Machine

Corn Seeding Machine

The machine works together with the tractor and has independent seed box and fertilizer box. It can complete trenching, seeding, covering and other processes at one time, with high accuracy. It has the characteristics of uniform seeding, uniform depth, stable row spacing, good soil covering, seed saving and high efficiency.

Potato Planter

Potato Planter

Agricultural potato planter farming machine/good quality potato seeds planting machine

Flip Plow

Flip Plow

The reversing plow is matched with a four-wheel tractor, suitable for plowing operations in sandy soil and dry and mature land, and can perform two-way shuttle operations.

Disc Harrow

Disc Harrow

The disc harrow is mainly suitable for stubble removal before plowing, breaking the surface compaction, chopping straw and returning it to the field. It has a strong ability to penetrate and break the soil. After raking, the surface is flat and the soil is loose and broken.

Disc Plough

Disc Plough

The disc plow is matched with a tractor, and the plow blades rotate during operation to plow the soil. With no grass entanglement, no blockage, and no soil, it can cut off the stems and rhizomes of crops. It is suitable for arable land with overgrown weeds, dense stems, and broken bricks and stones in the soil.

Rotary Tiller

Rotary Tiller

The rotary tillage and stubble removal machine is matched with the tractor with a three-point suspension, and it is used as an intermediate gear transmission to drive the blade to rotate through the tractor. Labor saving, fine soil quality, low overall cost.

Field Cultivator

Field Cultivator

The double-spring field cultivator adopts a double-spring tensioning device. When the field cultivator encounters an obstacle in the working process, it can automatically bounce up and quickly return to the original working state after crossing over, thereby protecting the plow tip. The machine has It is easy to operate and easy to adjust the depth. It is suitable for loosening soil such as cotton, corn, and beans.

Lawn Mower

Lawn Mower

Mainly used in garden decoration trimming, lawn green trimming, greening scenic spots, pastoral trimming, field weeding, other grass fields such as football fields, private villa gardens, and the trimming of agricultural, forestry, livestock and pasture land vegetation, etc.

1-3T Trailer

1-3T Trailer

Agricultural trailers are matched with tractors, which are suitable for transporting various bulk goods in mountains, plains, mountains, swamps, hills, rural areas and roads. This type of vehicle has a firm structure, beautiful appearance, safety, reliability and durability.

Used HOWO A7 Tractor Truck low roof

Used HOWO A7 Tractor Truck low roof

YEAR: 2015-2020 MILEAGE: 30000 - 35000 KM ENGINE : 336HP, 371HP, 375HP, 420HP BRAND : HOWO

iSPOT® iScout

iSPOT® iScout

The iSPOT® iScout is a military grade security tracking device that can be deployed to track containers, trucks, tankers and other lockable conveyances. It is suitable for rough use in outdoor conditions and is MIL-STD-810F compliant against shock and vibration. Using GPS tracking, the iSPOT® iScout is able to send real time location updates and tamper alerts via a 3G network. It comes with a variable length stainless steel security cable and a mechanical bolt seal for additional security. Any unauthorised opening or tampering of the security cable will result in a tamper. Furthermore, it can be used to provide monitoring for the iSPOT® iSensor and iSPOT® Temp in tanker and cold chain configurations. The iSPOT® iScout is a patented device under our strategic partner Ascent Solutions.

iSPOT® In-Vehicle Management (IVM)

iSPOT® In-Vehicle Management (IVM)

1. Able to monitor iSPOT® iSensor & iSPOT Temp 2. Multiple analogs and digital I/Os 3. Supports dual SIM 4. High input voltage range (8V – 30V) 5. MIL-STD-810F compliant 6. Satellite failover (optional)